Gigabyte GA-Z68A-D3H-B3 Manual - Page 41

Command Rate(CMD) Options are: Auto (default), 1~3. >>>>> Channel A/B Misc Timing Control IO Latency Options are: Auto (default), 1~31. Round Trip Latency Options are: Auto (default), 1~255.  Advanced Voltage Settings CMOS Setup Utility-Copyright (C) 1984-2011 Award Software Advanced Voltage Settings ****** Mother Board Voltage Control ****** Voltage Types Normal Current >>> CPU Load-Line Calibration [Auto] Dynamic Vcore(DVID) +0.000V [Auto] QPI/Vtt Voltage 1.050V [Auto] Graphics DVID +0.000V [Auto] >>> MCH/ICH CPU PLL 1.800V [Auto] Item Help Menu Level  DRAM Voltage DRAM Termination Ch-A Data VRef. Ch-B Data VRef. Ch-A Address VRef. Ch-B Address VRef. 1.500V 0.750V 0.750V 0.750V 0.750V 0.750V [Auto] [Auto] [Auto] [Auto] [Auto] [Auto] Move Enter: Select F5: Previous Values +/-/PU/PD: Value F10: Save F6: Fail-Safe Defaults ESC: Exit F1: General Help F7: Optimized Defaults >>> CPU Load-Line Calibration Enables or disables Load-Line Calibration. This item allows you to adjust Vdroop at different levels. En- abling Load-Line Calibration may keep the CPU voltage more constant under light and heavy CPU load. (Default: Auto) Standard Disables Load-Line Calibration and sets VDroop following Intel specifications. Level 1 Enables Load-Line Calibration and slightly adjusts VDroop. Level 2 Enables Load-Line Calibration and moderately adjusts VDroop. Note: Enabling Load-Line Calibration may result in damage to your CPU or reduce the useful life of the CPU. Dynamic Vcore(DVID) This option is configurable only when CPU Vcore is set to Normal. The default is Auto. QPI/Vtt Voltage The default is Auto. Graphics DVID The default is Auto. >>> MCH/ICH CPU PLL The default is Auto. DRAM Voltage The default is Auto. - 41 - BIOS Setup