Gigabyte GA-Z68XP-UD3 Manual - Page 11
Support for RAID 0, RAID 1, and RAID 10, Support for SATA RAID 0 and RAID 1 - ssd
View all Gigabyte GA-Z68XP-UD3 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
Storage Interface - Support for RAID 0, RAID 1, RAID 5, and RAID 10 * When a RAID set is built across the SATA 6Gb/s and SATA 3Gb/s channels, the system performance of the RAID set may vary depending on the devices being connected. 1 x Marvell 88SE9172 chip: - 2 x SATA 6Gb/s connectors (GSATA3_6, GSATA3_7) supporting up to 2 SATA 6Gb/s devices - Support for SATA RAID 0 and RAID 1 USB Chipset: - Up to 14 USB 2.0/1.1 ports (8 ports on the back panel, 6 ports available through the internal USB headers) 2 x Etron EJ168 chips: - Up to 4 USB 3.0/2.0 ports (2 ports on the back panel, 2 ports available through the internal USB header) IEEE 1394 VIA VT6308 chip: - Up to 2 IEEE 1394a ports (1 port on the back panel, 1 port available through the internal IEEE 1394a header) Internal 1 x 24-pin ATX main power connector Connectors 1 x 8-pin ATX 12V power connector 4 x SATA 6Gb/s connectors 4 x SATA 3Gb/s connectors 1 x mSATA connector + SSD 20 GB j 1 x mSATA connector k 1 x CPU fan header 2 x system fan headers 1 x power fan header 1 x front panel header 1 x front panel audio header 1 x S/PDIF Out header 3 x USB 2.0/1.1 headers 1 x USB 3.0/2.0 header 1 x IEEE 1394a header 1 x serial port header 1 x clearing CMOS jumper 1 x Trusted Platform Module (TPM) header Back Panel 1 x PS/2 keyboard/mouse port Connectors 1 x HDMI port 1 x optical S/PDIF Out connector 1 x IEEE 1394 port 8 x USB 2.0/1.1 ports 2 x USB 3.0/2.0 ports j Only for GA-Z68XP-UD3-iSSD. k Only for GA-Z68XP-UD3. - 11 - Hardware Installation