Gigabyte GSmart i128 ROM Upgrade SOP-g-Smart/ GSmart i/ GSmart i128/ GSmart i1
Gigabyte GSmart i128 Manual
View all Gigabyte GSmart i128 manuals
Add to My Manuals
Save this manual to your list of manuals |
Gigabyte GSmart i128 manual content summary:
- Gigabyte GSmart i128 | ROM Upgrade SOP-g-Smart/ GSmart i/ GSmart i128/ GSmart i1 - Page 1
PC before upgrade. ** Please make sure the battery is over 60% full before upgrade. ROM Upgrade Procedure : Step 1. There are two phone and turn off the phone. Press Send + End + Power key at the same time, and it will start to download. (1)Blue Light: Reading, from Mini SD card to SDRAM. (2)Orange - Gigabyte GSmart i128 | ROM Upgrade SOP-g-Smart/ GSmart i/ GSmart i128/ GSmart i1 - Page 2
use the stylus and follow the direction. Step 5. Select "Time zone", then tap "Next" - Gigabyte GSmart i128 | ROM Upgrade SOP-g-Smart/ GSmart i/ GSmart i128/ GSmart i1 - Page 3
Step 6. Tap "Next" in Stylus introduction Step 7. Tap and hold your selection and choose the "Cut" function - Gigabyte GSmart i128 | ROM Upgrade SOP-g-Smart/ GSmart i/ GSmart i128/ GSmart i1 - Page 4
Step 8. Tap and hold, then choose the "Paste" function Step 9. Skip Password by tapping "Skip" Step 10. ROM upgrade procedure completed
Notice Before ROM Upgrade :
** Please backup all personal files and applications installed by user to PC before upgrade.
** Please make sure the battery is
over 60% full
before upgrade.
ROM Upgrade Procedure :
Step 1. There are two items, a file (.nb0) and CUSTFILE folder. Download them to your SD card.
Step 2. Place the Mini SD card into the phone and turn off the phone. Press
Send + End +
Power
key at the same time, and it will start to download.
(1)Blue Light: Reading, from Mini SD card to SDRAM.
(2)Orange Light: Writing, from SDRAM to Flash.
Step 3. After entering Upgrade mode,
plug in the charger AT THIS MOMENT
to ensure upgrade
stability.
Step 4. Upgrade takes about 20 mins. Upon finish, the phone will automatically restart. First
restart after each upgrade would take a bit time. When the calibration screen display, please