Gigabyte GV-N4464T-P Manual - Page 9
turn on the computer and monitor. If your
View all Gigabyte GV-N4464T-P manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
English 4. Locate the AGP slot. If necessary, remove the metal cover from this slot; then align your graphics card with the AGP slot, and press it in firmly until the card is fully eated. Graphics card 5. Replace the screw to fasten the card in place, and replace the computer cover. AGP slot 6. Plug the display cable into your card; then turn on the computer and monitor. If your graphics card came with a DVI connector, you can connect a flat panel display to the appropriate connector, as shown below... To VGA Monitor To Flat Panel Display (For GV-N4464D only) To TV or VCR S-Video (For GV-N4464T-P only) You are now ready to proceed with the installation of the graphics card driver. For detailed instructions, select your operating system from the list below. - 9 - Hardware Installation