Gigabyte GV-NX72G512P1 Manual - Page 26

English nView Display Settings properties * „ nView allows you to connect separate displays to single graphics card. • nView Display mode: select your preferred nView display modes here. Options: Single display/ Clone/ Dual View • Primary/Secondary display: select a single display or display pair. The selected display combination will appear in the graphical representation below. • Make this the primary display: Specifies that the display corresponding to the icon you selected above is the primary display. • Click Apply to apply settings or click OK to save settings. „ If TV is chosen as the display, you will need to select the proper TV format. To do this, click Device Settings followed by Select TV format. Select the format for your television and then click Apply followed by OK. Display Matrix Model CRT+TV CRT+DVI DVI+TV GV-NX72G128D/512P1/512P2 Yes Yes Yes Dual-Monitor Setup: You can set the display to output from two monitors on the nView Display Settings page. This graphics card supports the following modes: (1) Clone Mode: Clone mode indicates that both displays in the display pair show images of the same desktop. Select Clone from the nView Display Mode list and click Apply. (2) Dual View Mode: Dualview mode indicates that both displays in the display pair function as one virtual desktop. Unlike Horizontal Span or Vertical Span mode, Dualview treats each display as a separate device. This means that the taskbar will not be stretched across displays and 3D applications are not accelerated as efficiently as when the application spans displays. Select DualView from the nView Display Mode list and click Apply. Clone Mode Dual View Mode "*" Only Single display mode is available when SLI mode is enabled. GV-NX72G Series Graphics Accelerator - 22 -