Gigabyte H410M DS2V V2 User Manual - Page 26
Vcore Voltage Mode/CPU Vcore/Dynamic Vcore DVID/BCLK Adaptive Voltage/CPU
View all Gigabyte H410M DS2V V2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 26 highlights
&& Realtime Memory Timing Allows you to fine-tune memory timings after the BIOS stage. (Default: Auto) && Memory Enhancement Settings Provides several memory performance enhancement settings: Auto, Relax OC, Enhanced Stability, Normal, Enhanced Performance, High Frequency, High Density, and DDR-4500+. (Default: Auto) && Memory Channel Detection Message Allows you to determine whether to show an alert message when the memory is not installed in the optimal memory channel. (Default: Enabled) SPD Info Displays information on the installed memory. Memory Channels Timing dd Channels Standard Timing Control, Channels Advanced Timing Control, Channels Misc Timing Control These sections provide memory timing settings. Note: Your system may become unstable or fail to boot after you make changes on the memory timings. If this occurs, please reset the board to default values by loading optimized defaults or clearing the CMOS values. && Vcore Voltage Mode/CPU Vcore/Dynamic Vcore (DVID)/BCLK Adaptive Voltage/CPU Graphics Voltage (VAXG)/DRAM Voltage (CH A/B) These items allow you to adjust the CPU Vcore and memory voltages. Advanced Voltage Settings This submenu allows you to configure Load-Line Calibration level, over-voltage protection level, and overcurrent protection level. - 26 -