Gigabyte MD30-RS0 Manual

Gigabyte MD30-RS0 Manual

Get Gigabyte MD30-RS0 PDF manuals and user guides View all Gigabyte MD30-RS0 manuals
Add to My Manuals
Save this manual to your list of manuals

Gigabyte MD30-RS0 manual content summary:

  • Gigabyte MD30-RS0 | Manual - Page 1
    MD30-RS0 Dual LGA2011 sockets R3 motherboard for Intel® E5-2600 V3 series processors User's Manual Rev. 1001
  • Gigabyte MD30-RS0 | Manual - Page 2
    provides the following types of documentations:  For detailed product information, carefully read the User's Manual. For more information, visit our website at: http://b2b.gigabyte.com You are a professional? Get an access to our complete source of sales, marketing & technical materials at: http
  • Gigabyte MD30-RS0 | Manual - Page 3
    Table of Contents Box Contents...5 MD30-RS0 Motherboard Layout 6 Block Diagram...9 Chapter 1 Hardware Installation 10 1-1 Installation Precautions 10 1-2 Product Specifications 11 1-3 Installing the CPU and CPU Cooler 13 1-3-1 Installing the CPU...13 1-3-2
  • Gigabyte MD30-RS0 | Manual - Page 4
    ...112 2-7 Save & Exit Menu 114 2-8 BIOS POST Codes 116 2-9 BIOS POST Beep code 120 2-9-1 PEI Beep Codes...120 2-9-2 DEX Beep Codes 120 2-10 BIOS Recovery Instruction 121 - 4 -
  • Gigabyte MD30-RS0 | Manual - Page 5
    Box Contents Motherboard Driver CD Two SATA 6Gb/s cables User's Manual I/O Shield • The box contents above are for reference only and the actual items shall depend on the product package you obtain. The box contents are
  • Gigabyte MD30-RS0 | Manual - Page 6
    MD30-RS0 Motherboard Layout 50 51 12 3 4 56 7 43 48 44 49 52 53 54 55 42 45 56 41 46 47 58 57 13 40 59 39 37 38 35 36 19 34 20 16 33 22 32 23 21 31 30 29 27 25 24 18 28 26 8 11 12 9 14 15 10 17 - 6 -
  • Gigabyte MD30-RS0 | Manual - Page 7
    connector#3 System fan connector#2 System fan connector#1 Front panel header HDD back plane board header SATA3 6Gb/s connector SATA port 0 DOM support jumper SATA3 6Gb/s connectors sSATA3 6Gb/s connectors ME recovery jumper sSATA SGPIO header TPM module connector Case open intrusion alert header PCI
  • Gigabyte MD30-RS0 | Manual - Page 8
    slot PCI Express x1 slot Clearing Supervisor Password jumper Mini-SAS cable connector#1 supports SATA3 6Gb/s Mini-SAS cable connector#2 supports SATA3 6Gb/s Force to Stop FRB Timer jumper PCI Express x4 slot of hard disk damage. Please refer to Page 32 for SATA_DOM0 jumper setting instruction. - 8 -
  • Gigabyte MD30-RS0 | Manual - Page 9
    Block Diagram - 9 -
  • Gigabyte MD30-RS0 | Manual - Page 10
    electrostatic discharge (ESD). Prior to installation, carefully read the user's manual and follow these procedures: • Prior to installation, do not remove are uncertain about any installation steps or have a problem related to the use of the product, please consult a certified computer technician.
  • Gigabyte MD30-RS0 | Manual - Page 11
    /SSATA0/SSATA1/ SSATA2/SSATA3/SSATA4/SSATA5) 8 x SAS 6Gb/s connectors (SAS0/SAS1/SAS2/SAS3/SAS4/SAS5/SAS6/SAS7; Activating SAS ports with Gigabyte extension card Support for Intel RSTe SATA RAID 0/1/5/10 Up to 4 USB 3.0 ports (2 on the back panel, 2 additional ports via the USB brackets connected
  • Gigabyte MD30-RS0 | Manual - Page 12
    System fan speed control * Whether the CPU/system fan speed control function is supported will depend on the CPU/system cooler you install. ŠŠ 1 x 128 Mbit flash ŠŠ AMI BIOS ŠŠ ATX Form Factor; 12 inch x 10 inch * GIGABYTE reserves the right to make any changes to the product specifications and
  • Gigabyte MD30-RS0 | Manual - Page 13
    1-3 Installing the CPU and CPU Cooler Read the following guidelines before you begin to install the CPU: • Make sure that the motherboard supports the CPU. • Always turn off the computer and unplug the power cord from the power outlet before installing the CPU to prevent hardware damage. • Locate
  • Gigabyte MD30-RS0 | Manual - Page 14
    B. Follow the steps below to correctly install the CPU into the motherboard CPU socket. •• Before installing the CPU, make sure to turn off the computer and unplug the power cord from the power outlet to prevent damage to the CPU. •• To protect the socket contacts, do not remove the protective
  • Gigabyte MD30-RS0 | Manual - Page 15
    Lever B Lever A Step 5: Step 6: Once the CPU is properly inserted, carefully replace the Finally, secure lever A under its retention tab to load plate. Then secure lever B under its retention tab. complete the installation of the CPU. The protective plastic cover may pop off from the load
  • Gigabyte MD30-RS0 | Manual - Page 16
    to correctly install the CPU cooler on the motherboard. (Actual installation process may differ depending the CPU cooler to be used. Refer to the user's manual for your CPU cooler.) Step 1: Step 2: Apply an even and thin layer of thermal grease on the Place the cooler atop the CPU, aligning the
  • Gigabyte MD30-RS0 | Manual - Page 17
    you are unable to insert the memory, switch the direction. 1-4-1 Four Channel Memory Configuration This motherboard provides Eight DDR4 memory sockets and supports Four Channel Technology. After the memory is installed, the BIOS will automatically detect the specifications and capacity of the memory
  • Gigabyte MD30-RS0 | Manual - Page 18
    1-4-2 Installing a Memory Before installing a memory module, make sure to turn off the computer and unplug the power cord from the power outlet to prevent damage to the memory module. Be sure to install DDR4 DIMMs on this motherboard. Installation Step: Step 1. Insert the DIMM memory module
  • Gigabyte MD30-RS0 | Manual - Page 19
    Internet connection with data transfer speeds of 10/100/1000Mbps. This port is the decated LAN port for server management. USB 3.0 Port The USB port supports the USB 3.0 specification. Use this port for USB devices such as a USB keyboard/mouse, USB printer, USB flash drive and etc. USB 2.0 Port The
  • Gigabyte MD30-RS0 | Manual - Page 20
    1-6 Internal Connectors 26 6 3 20 22 17 18 19 28 4 21 27 15 14 1 13 25 16 12 24 23 7 8 10 11 5 2 9 1) ATX1 15) SSATA_SGP 2) P12V_AUX1 16) SATA_SGP 3) P12V_AUX2 17) MINI_CN1 4) PMBUS 18) MINI_CN2 5) CPU0_FAN (for primary CPU) 19) F_USB3 6) CPU1_FAN (for seconary CPU) 20)
  • Gigabyte MD30-RS0 | Manual - Page 21
    1/2/3) ATX1/P12V_AUX1/P12V_AUX2 (2x4 12V Power Connector and 2x12 Main Power Connector) With the use of the power connector, the power supply can supply enough stable power to all the components on the motherboard. Before connecting the power connector, first make sure the power supply is
  • Gigabyte MD30-RS0 | Manual - Page 22
    design. When connecting a fan cable, be sure to connect it in the correct orientation (the black connector wire is the ground wire). The motherboard supports CPU fan speed control, which requires the use of a CPU fan with fan speed control design. For optimum heat dissipation, it is recommended that
  • Gigabyte MD30-RS0 | Manual - Page 23
    6Gb/s Connectors) The SATA connectors conform to SATA 6Gb/s standard and are compatible with SATA 3Gb/s and 1.5Gb/s standard. Each SATA connector supports a single SATA device. Please see page 34 for SATA DOM jumper setting. 7 1 Normal Mode: SATA DOM Mode: SSATA3 SSATA1 SSATA2 SSATA0 SATA5
  • Gigabyte MD30-RS0 | Manual - Page 24
    17/18) MINI_CN1/MINI_CN2 (Mini SAS cable connectors) The Mini SAS connectors conform to SATA 6Gb/s standard. Each Mini SAS connector supports four SATA device. B1 A18 A1 B18 Pin No. A1 A2 A3 A4 A5 A6 A7 A8 A9 A10 A11 A12 A13 A14 A15 A16
  • Gigabyte MD30-RS0 | Manual - Page 25
    19) F_USB3 (USB 3.0 Header) The headers conform to USB 3.0 specification. Each USB header can provide two USB ports via an optional USB bracket. For purchasing the optional USB bracket, please contact the local dealer. Pin No. Definition 1 Power 2 IntA_P1_SSRX- 20 1 3 IntA_P1_SSRX+ 4 GND 5
  • Gigabyte MD30-RS0 | Manual - Page 26
    21) TPM (TPM Module Connector) 22) IPMB (IPMB Connector) 14 2 13 1 Pin No. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 Definition CLK_33M_TPM P_3V3_AUX LPC_RST P3V3 LPC_LAD0 IRQ_SERIAL LPC_LAD1 TPM_DET_N LPC_LAD2 NC LPC_LAD3 GND LPC_FRAME_N GND 1 Pin No. Definition 1 Clock 2 GND 3 3 Data - 26 -
  • Gigabyte MD30-RS0 | Manual - Page 27
    23) FP_1 (Front Panel Header) Connect the power switch, reset switch, chassis intrusion switch/sensor and system status indicator on the chassis to this header according to the pin assignments below. Note the positive and negative pins before connecting the cables. 23 1 24 2 Pin No. 1 2 3 4 5 6
  • Gigabyte MD30-RS0 | Manual - Page 28
    24) BP_1 (HDD Back Plane Board Hearders) 25) SW_RAID (Intel RAID Key Header) 25 1 26 2 Pin No. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 Definition BP_SGP_CLK NC BP_SGP_GLD FAN_GATE_N BP_SGP_DOUT GND KEY Rreset GND BP_LED_A_N BP_LED_G_N GND BP_SGP_DIN NC GND
  • Gigabyte MD30-RS0 | Manual - Page 29
    26) LED_BMC (BMC Firmware Readiness LED) State Description On BMC firmware is initial Blinking BMC firmware is ready Off AC loss 27) CASE_OPEN (Case open intrusion alert header) Open: Normal operation. Closed: Active chassis intrustion alert. Hardware Installation - 29 -
  • Gigabyte MD30-RS0 | Manual - Page 30
    28) BAT (Battery) The battery provides power to keep the values (such as BIOS configurations, date, and time information) in the CMOS when the computer is turned off. Replace the battery when the battery voltage drops to a low level, or the CMOS values may not be accurate or may be lost. • Always
  • Gigabyte MD30-RS0 | Manual - Page 31
    1-7 Jumper Settings 8 7 5 6 4 3 2 1 1) SATA_DOM0 2) ME_UPDATE 3) PCH_ME 4) CLR_CMOS 5) S3_MASK 6) BIOS_PWD 7) BMC_FRB 8) BIOS_RCVR - 31 - Hardware Installation
  • Gigabyte MD30-RS0 | Manual - Page 32
    1) SATA_DOM0 (SATA port 0 Jumper) CAUTION! • If the SATA DOM power is supplied by the motherboard, set the jumper to pin 1-2. • If the SATA DOM power is supplied by external power, set the jumper to pin 2-3. • If a SATA type hard drive is connected to the motherboard, please ensure the jumper is
  • Gigabyte MD30-RS0 | Manual - Page 33
    3) ME_RCVR (ME Recovery Jumper) 1 1-2 Close: Normal operation.(Default setting) 1 2-3 Close: ME recovery mode. 4) CLR_CMOS (Clearing CMOS Jumper) Use this jumper to clear the CMOS values (e.g. date information and BIOS configurations) and reset the CMOS values to factory defaults. To clear the CMOS
  • Gigabyte MD30-RS0 | Manual - Page 34
    5) S3_MASK (S3 Power On Select Jumper) 1-2 Close: Stop an initial power on when BMC is not ready. 1 2-3 Close: Keep initial power on. (Default setting) 1 6) BIOS_PWD (Clearing Supervisor Password Jumper) 1 1-2 Close: Normal operation. (Default setting) 1 2-3 Close: Skip supervisor password.
  • Gigabyte MD30-RS0 | Manual - Page 35
    7) BMC_FRB (Force to Stop FRB Timer Jumper) 1 1-2 Close: Normal operation. (Default setting) 2-3 Close: Force to Stop FRB Timer. 1 8) BIOS_RCVR (BIOS Recovery Jumper) 1 1-2 Close: Normal operation. (Default setting) 2-3 Close: BIOS recovery mode. 1 - 35 - Hardware Installation
  • Gigabyte MD30-RS0 | Manual - Page 36
    Setup program, press the key during the POST when the power is turned on. • BIOS flashing is potentially risky, if you do not encounter problems of using the current BIOS version, it is recommended that you don't flash the BIOS. To flash the BIOS, do it with caution. Inadequate BIOS
  • Gigabyte MD30-RS0 | Manual - Page 37
     Main This setup page includes all the items in standard compatible BIOS.  Advanced This setup page includes all the items of AMI BIOS special enhanced features. (ex: Auto detect fan and temperature status, automatically configure hard disk parameters.)  Intel RC Setup This setup page includes
  • Gigabyte MD30-RS0 | Manual - Page 38
    2-1 The Main Menu Once you enter the BIOS Setup program, the Main Menu (as shown below) appears on the screen. Use arrow keys to move among the items and press to accept or enter other sub-menu. Main Menu Help The on-screen description of a highlighted setup option is displayed on the bottom
  • Gigabyte MD30-RS0 | Manual - Page 39
    BIOS Information Project Name Display the project name information. Porject Version Display version number of the BIOS setup utility. BIOS Build Date and Time Displays the date and time when the BIOS setup utility was created. BMC Information BMC Firmware Version Display version number of the
  • Gigabyte MD30-RS0 | Manual - Page 40
    Onboard LAN Information LAN1/LAN2/LAN3/LAN4 MAC Address Display LAN1/LAN2/LAN/LAN4 MAC address information. System Date Set the date following the weekday-month-day- year format. System Time Set the system time following the hour-minute- second format. - 40 - BIOS Setup
  • Gigabyte MD30-RS0 | Manual - Page 41
    2-2 Advanced Menu The Advanced menu display submenu options for configuring the function of various hardware components. Select a submenu item, then press Enter to access the related submenu screen. BIOS Setup - 41 -
  • Gigabyte MD30-RS0 | Manual - Page 42
    2-2-1 Serial Port Console Redirection - 42 - BIOS Setup
  • Gigabyte MD30-RS0 | Manual - Page 43
    BIOS Setup - 43 -
  • Gigabyte MD30-RS0 | Manual - Page 44
    to send start/stop signals. Options available: None/Hardware RTS/CTS. Default setting is None. VT-UTF8 Combo Key Support (Note) Enable/Disable VT-UTF8 Combo Key Support. Options available: Enabled/Disabled. Default setting is Enabled. Recorder Mode (Note) When this mode enabled, only text will be
  • Gigabyte MD30-RS0 | Manual - Page 45
    Note) On Legacy OS, the number of Rows and Columns supported redirection. Options available: 80x24/80X25. Default setting is 80x24. setting is Always Enable. Out-of-Bnad Mgmt Port Microsoft Windows Emerency Management Service (EMS) allows for remote management of a Windows Server OS through a serial
  • Gigabyte MD30-RS0 | Manual - Page 46
    2-2-2 PCI Subsystem Settings PCI Express Slot #1/#2/#3/#4/#5/#6#7 I/O ROM When enabled, This setting will initialize the device expansion ROM for the related PCI-E slot. Options available: Enabled/Disabled. Default setting is Enabled. Onboard LAN#1/#2/#3/#4 Controller Enable/Disable onboard LAN
  • Gigabyte MD30-RS0 | Manual - Page 47
    SR-IOV Support If system has SR-IOV capable PCIe Devices, this option enables or disables Single Root IO Virtualization Support. Options available: Enabled/Disabled. Default setting is Disabled. PCI Express Settings Press [Enter] for configuration of advanced items. BIOS Setup - 47 -
  • Gigabyte MD30-RS0 | Manual - Page 48
    2-2-2-1 PCI Express Settings PCI Express Device Register Settings Relaxed Ordering Enable/DIsable PCI Express Device Relaxed Ordering feature. Options available: Enabled/Disabled. Default setting is Disabled. Extended Tag Wnen this feature is enabled, the system will allow device to use 8-bit Tag
  • Gigabyte MD30-RS0 | Manual - Page 49
    Link Training Timeout (us) Define the number of Microseconds software will wait before polling 'Link Training' bit in Link Status register. Press / keys to increase or decrease the desired values. Value rang is from 10 to 10000 us. Unpopulated Links When this item is set to 'Disable Link,
  • Gigabyte MD30-RS0 | Manual - Page 50
    (Note) Enable/Disable Ipv4 PXE feature. Options available: Enabled/DIsabled. Default setting is Enabled. Ipv6 PXE Support(Note) Enable/Disable Ipv6 PXE feature. Options available: Enabled/DIsabled. Default setting is Enabled. PXE boot wait time(Note) Press / keys to increase or decrease
  • Gigabyte MD30-RS0 | Manual - Page 51
    Support Module Configuration CSM Support Enable/Disable Compatibility Support Module (CSM) support. Options available: Enabled/Disabled. Default setting is Enabled. CSM16 Module Version Display CSM Module version information. Gate20 Active Upon Request: GA20 can be disabled using BIOS services
  • Gigabyte MD30-RS0 | Manual - Page 52
    Option ROM execution Network Controls the execution UEFI and Legacy PXE OpROM. Options available: Do not launch/UEFI/Legacy. Default setting is Legacy. Storage Controls the execution UEFI and Legacy Storage OpROM. Options available: Do not launch/UEFI/Legacy. Default setting is Legacy. Video
  • Gigabyte MD30-RS0 | Manual - Page 53
    2-2-5 Post Report Configuration Post Report Configuration Error Message Report Post Error Message Enable/Disable Info Error Message support. Options available: Enabled/Disabled. Default setting is Enabled. BIOS Setup - 53 -
  • Gigabyte MD30-RS0 | Manual - Page 54
    2-2-6 Trusted Computing Configuration Security Device Support Select Enabled to activate TPM support feature. Options available: Enabled/Disabled. Default setting is Disabled. Current Status Information Display current TPM status information. - 54 - BIOS Setup
  • Gigabyte MD30-RS0 | Manual - Page 55
    USB Configuration USB Devices: Display the USB devices connected to the system. XHCI Hand-off Enable/Disable XHCI (USB 3.0) Hand-off support. Options available: Enabled/Disabled. Default setting is Enabled. EHCI Hand-off Enable/Disable EHCI (USB 2.0) Hand-off function. Options available: Enabled
  • Gigabyte MD30-RS0 | Manual - Page 56
    2-2-8 Chipset Configuration Restore on AC Power Loss (Note) Defines the power state to resume to after a system shutdown that is due to an interruption in AC power. When set to Last State, the system will return to the active power state prior to shutdown. When set to Stay Off, the system remains
  • Gigabyte MD30-RS0 | Manual - Page 57
    2-9 SIO Configuration BIOS Setup - 57 -
  • Gigabyte MD30-RS0 | Manual - Page 58
    BIOS Setup - 58 -
  • Gigabyte MD30-RS0 | Manual - Page 59
    AMI SIO Driver Version Display the AMI SIO driver version information. Super IO Chip Logical Device(s) Configuration [*Active*] Serial Port 1/2 Press [Enter] for confuguration of advanced items. [*Active*] PS2 Keyboard Press [Enter] for confuguration of advanced items. [*Active*] PS2 Mouse Press [
  • Gigabyte MD30-RS0 | Manual - Page 60
    Possible: Configure Serial Port 1 base I/O addressand IRQ. Option available: Use Automatic Settings IO=3F8h; IRQ=4; DMA;/ IO=3F8h; IRQ=3,4,5,7,9,10,11,12; DMA;/ IO=2F8h; IRQ=3,4,5,7,9,10,11,12; DMA;/ IO=3E8h; IRQ=3,4,5,7,9,10,11,12; DMA;/ IO=2E8h; IRQ=3,4,5,7,9,10,11,12; DMA; Default setting is Use
  • Gigabyte MD30-RS0 | Manual - Page 61
    2-2-10 iSCSI Configuration iSCSI Initiator Name Add an Attempts Press [Enter] for configuration of advanced items. Delete Attempts Press [Enter] for configuration of advanced items. Change Attempt Order Press [Enter] for configuration of advanced items. - 61 - BIOS Setup
  • Gigabyte MD30-RS0 | Manual - Page 62
    2-3 Intel RC Setup Menu Intel RC Setup menu displays submenu options for configuring the function of North Bridge and South Bridge. Select a submenu item, then press Enter to access the related submenu screen. RC Revision Display Intel RC version information. BIOS Setup - 62 -
  • Gigabyte MD30-RS0 | Manual - Page 63
    2-3-1 Processor Configuration - 63 - BIOS Setup
  • Gigabyte MD30-RS0 | Manual - Page 64
    Disabled. Default setting is Enabled. Enable SMX (Intel Safer Mode Extensions Technology) Enable/Disblae Intel Safer Mode Extensions (SMX) support function. Options available: Enabled/Disabled. Default setting is Disabled. Hardware Prefetcher Select whether to enable the speculative prefetch unit of
  • Gigabyte MD30-RS0 | Manual - Page 65
    /112. Default setting is 32. X2APIC Options available: Enabled/Disabled. Default setting is Disabled. AES-NI Enable/Disable AES-NI (Intel Advanced Encryption Standard New Instructions) support function. Options available: Enabled/Disabled. Default setting is Enabled. - 65 - BIOS Setup
  • Gigabyte MD30-RS0 | Manual - Page 66
    2-3-1-1 Pre-Socket Configuration BIOS Setup - 66 -
  • Gigabyte MD30-RS0 | Manual - Page 67
    CPU Socket 0/1 Configuration Press [Enter] for configuration of advanced items. Cores Enabled (for CPU socket 0/1) Number of Cores to enable. 0 means all cores. 14 Cores is available. Press and keys to adjust desired values. - 67 - BIOS Setup
  • Gigabyte MD30-RS0 | Manual - Page 68
    2-3-2 Advanced Power Management Configuration Advanced Power Management Configuration Power Technology Option available:Disable/Energy Efficient/Custom. Default setting is Energy Efficient. Config TDP Options available: Enabled/Disabled. Default setting is Disabled. Config TDP Level(Note) Options
  • Gigabyte MD30-RS0 | Manual - Page 69
    2-3-2-1 CPU P State Control EIST (P-State) Conventional Intel SpeedStep Technology switches both voltage and frequency in tandem between high and low levels in response to processor load. Options available: Enabled/Disabled. Default setting is Enabled. Turbo Mode When this item is enabled, tje
  • Gigabyte MD30-RS0 | Manual - Page 70
    2-3-2-2 CPU C State Control Package C State Limit Configure state for the C-State package limit. Options available: C0/C1 state/C2 state/C6(non Retention) state/C6(Retention) state. Default setting is C6(non Retention) state. CPU C3/C6 Report Allows you to determine whether to let the CPU enter C3/
  • Gigabyte MD30-RS0 | Manual - Page 71
    2-3-2-3 CPU T State Control ACPI T-States Enable/Disable CPU throttling by OS. Thorttling reduces power comsumption. Options available: Enabled/Disabled. Default setting is Enabled. - 71 - BIOS Setup
  • Gigabyte MD30-RS0 | Manual - Page 72
    2-3-3 Common RefCode Configuration Common RefCode Configuration Isoc Mode Options available: Auto/Enabled/Disabled. Default setting is Auto. Numa (Non-Uniform Memory Access) Options available: Enabled/Disabled. Default setting is Enabled. BIOS Setup - 72 -
  • Gigabyte MD30-RS0 | Manual - Page 73
    2-3-4 QPI Configuration - 73 - BIOS Setup
  • Gigabyte MD30-RS0 | Manual - Page 74
    QPI General Configuration Press [Enter] for configuration of advanced items. QPI Status Press [Enter] to view QPI status. Link Speed Mode Options available: Slow/Fast. Default setting is Fast. Link Frequency Select Options available: 6.4GB/s/8.0GB/s/9.6GB/s/Auto/Auto Limited. Default setting is Auto
  • Gigabyte MD30-RS0 | Manual - Page 75
    POR. Memory Frequency Configure memory frequency. Options available: Auto/1333/1400/1600/1800/1867/2000/2133. Default setting is Auto. ECC Support Options available: Auto/Disabled/Enabled. Default setting is Auto. Rank Margin Tool Options available: Auto/Disabled/Enabled. Default setting is Auto
  • Gigabyte MD30-RS0 | Manual - Page 76
    Memory Map Press [Enter] for configuration of advanced items. Memory RAS Configuration Press [Enter] for configuration of advanced items. BIOS Setup - 76 -
  • Gigabyte MD30-RS0 | Manual - Page 77
    2-3-5-1 Memory Topology - 77 - BIOS Setup
  • Gigabyte MD30-RS0 | Manual - Page 78
    2-3-5-2 Memory Thermal Set Throttling Configure Thermal Throttling Mode. Select OLTT or CLTT mode. Options available: Disabled/OLTT/CLTT. Default setting is CLTT. MEMHOT Throttling Mode Options available: Disabled/Output-only/Input-only. Default setting is Input-only. BIOS Setup - 78 -
  • Gigabyte MD30-RS0 | Manual - Page 79
    2-3-5-3 Memory Map Socket Interleave Below 4GB Splits the 0-4GB address space between two sockets, so that both sockets get a chunk of local memory below 4GB. Options available: Disabled/Enabled. Default setting is Disabled. Channel Interleaving Options available: Auto/1-way Interleave/2-way
  • Gigabyte MD30-RS0 | Manual - Page 80
    2-3-5-4 Memory RAS Configuration RAS Mode Enable/Disable RAS modes. Enabling Sparing and Mirroring is not supported. When this item is set to enabled, Sparing will be selected. Options available: Disable/Mirror/Lockstep Mode. Default setting is Disabled. Lockstep x4 DIMMs Options
  • Gigabyte MD30-RS0 | Manual - Page 81
    2-3-6 IIO Configuration IIO Configuration EV DFX Features Set this option to allow DFX Lock Bits to remain clear. Options available: Enabled/Disabled. Default setting is Disabled. IOAT Configuration Press [Enter] for configuration of advanced items. Intel VT for Directed I/O (VT-d) Press [Enter]
  • Gigabyte MD30-RS0 | Manual - Page 82
    2-3-6-1 IOAT Configuration IOAT Configuration Enable IOAT Control to enable/disable IOAT (Intel I/O Acceleration Technology) device. Options available: Enabled/Disabled. Default setting is Disabled. No Snoop Enable/Disable PCI Express Device No Snoop option. Options available: Enabled/Disabled.
  • Gigabyte MD30-RS0 | Manual - Page 83
    optimizations. Options available: Enabled/Disabled. Default setting is Disabled. Intel VT for Directed I/O (VT-d) Enable/Disable Intel VT for Directed I/O (VT-d) support function. Options available: Enabled/Disabled. Default setting is Enabled. Interrupt Remapping Enable/Disable interrupt remapping
  • Gigabyte MD30-RS0 | Manual - Page 84
    2-3-7 PCH Configuration PCH Configuration PCH Devices Press [Enter] for configuration of advanced items. PCH sSATA Configuration Press [Enter] for configuration of advanced items. PCH SATA Configuration Press [Enter] for configuration of advanced items. USB Configuration Press [Enter] for
  • Gigabyte MD30-RS0 | Manual - Page 85
    2-3-7-1 PCH Devices PCH CRID Enable/Disable Intel Compatible Revision ID. Options available: Enabled/Disabled. Default setting is Disabled. - 85 - BIOS Setup
  • Gigabyte MD30-RS0 | Manual - Page 86
    2-3-7-2 PCH sSATA Configuration BIOS Setup - 86 -
  • Gigabyte MD30-RS0 | Manual - Page 87
    configuration of advanced items. sSATA RSTe Boot Info(Note2) Enable/Disable SATA RSTe Boot Information. Options available: Enabled/Disabled. Default setting is Enabled. (Note1) Only Supported When HDD is in AHCI or RAID Mode. (Note2) Only Supported When HDD is in RAID Mode. - 87 - BIOS Setup
  • Gigabyte MD30-RS0 | Manual - Page 88
    Note) Enable/Disable HDD Hot-Plug function. Options available: Enabled/Disabled. Default setting is Disabled. Configured as eSATA(Note) Display Hot-Plug supported information. Spin Up Device (for Port 0/1/2/3)(Note) On an edge detect from 0 to 1, the PCH starts a COM reset initialization to the
  • Gigabyte MD30-RS0 | Manual - Page 89
    2-3-7-2-1 SATA Mode Options When SATA Type is set to IDE/AHCI Mode SATA LED locate When this option is enabled, LED/SGPIO hardware is attached. Options available: Enabled/Disabled. Default setting is Enabled. - 89 - BIOS Setup
  • Gigabyte MD30-RS0 | Manual - Page 90
    attached. Options available: Enabled/Disabled. Default setting is Enabled. Intel Rapid Recovery Technology Enable/Disable Intel Rapid Recovery Technology support function. Options available: Enabled/Disabled. Default setting is Enabled. RAID Option ROM UI banner Options available: Enabled/Disabled
  • Gigabyte MD30-RS0 | Manual - Page 91
    2-3-7-3 PCH SATA Configuration - 91 - BIOS Setup
  • Gigabyte MD30-RS0 | Manual - Page 92
    SATA RSTe Boot Information. Options available: Enabled/Disabled. Default setting is Enabled. SATA Mode options(Note 2) Press [Enter] for configuration of advanced items. (Note 1) Only Supported When HDD is in RAID Mode. (Note 2) Only Supported When HDD is in AHCI or RAID Mode. BIOS Setup - 92 -
  • Gigabyte MD30-RS0 | Manual - Page 93
    Note) Enable/Disable HDD Hot-Plug function. Options available: Enabled/Disabled. Default setting is Disabled. Configured as eSATA(Note) Display Hot-Plug supported information. Spin Up Device (for Port 0/1/2/3/4/5)(Note) On an edge detect from 0 to 1, the PCH starts a COM reset initialization to the
  • Gigabyte MD30-RS0 | Manual - Page 94
    2-3-7-3-1 SATA Mode Options When SATA Type is set to IDE/AHCI Mode SATA LED locate When this option is enabled, LED/SGPIO hardware is attached. Options available: Enabled/Disabled. Default setting is Enabled. BIOS Setup - 94 -
  • Gigabyte MD30-RS0 | Manual - Page 95
    banner Options available: Enabled/Disabled. Default setting is Enabled. Smart Response Technology Enable/Disable Intel Smart Response Technology support function. Options available: Enabled/Disabled. Default setting is Enabled. RAID OROM prompt delay Options available: 2 Seconds/4 Seconds/6 Seconds
  • Gigabyte MD30-RS0 | Manual - Page 96
    work on USB host conteoller and root ports for faster enumeration. Options available: Enabled/Disabled. Default setting is Disabled. xHCI Mode Enable/Disable xHCI (USB 3.0) support function. Options available: Smart Auto/Enabled/Disabled. Default setting is Smart Auto. BIOS Setup - 96 -
  • Gigabyte MD30-RS0 | Manual - Page 97
    2-3-8 Miscellaneous Configuration Miscellaneous Configuration Active Video Select active Video type. Options available: Onboard Device/Offboard Device. Default setting is Offboard Device. - 97 - BIOS Setup
  • Gigabyte MD30-RS0 | Manual - Page 98
    2-3-9 Server ME Configuration Greneral ME Configuration Operational Firmware Version Display Operational Firmware Version information. Recovery Firmware Version Display Recovery Firmware Version information. ME Firmware Features Display ME Firmware features information. ME Firmware Status #1/#2
  • Gigabyte MD30-RS0 | Manual - Page 99
    System Errors Enable/Disable system error logging function. Options available: Enabled/Disabled. Default setting is Enabled. S/W Error Injection Support Enable/Disable software injection error logging function. Options available: Enabled/Disabled. Default setting is Disabled. Whea Settings Press
  • Gigabyte MD30-RS0 | Manual - Page 100
    2-3-10-1 Whea Setting WHEA Support (Windows Hardware Error Architecture) Enable/Disable WHEA Support. Options available: Enabled/Disabled. Default setting is Enabled. BIOS Setup - 100 -
  • Gigabyte MD30-RS0 | Manual - Page 101
    2-3-10-2 Memory Error Enabling Memory Error Enabling Un-Correctable Errors disable Memory Options available: Enabled/Disabled. Default setting is Disabled. Memory corrected Errors enabling Options available: Enabled/Disabled. Default setting is Disabled. - 101 - BIOS Setup
  • Gigabyte MD30-RS0 | Manual - Page 102
    2-3-10-3 PCI/PCI Error Enabling PCI-Ex Error Enable (Note) Options available: Yes/No. Default setting is No. Corrected Error Enable Options available: Enabled/Disabled. Default setting is Disabled. Uncorrected Error Enable Options available: Enabled/Disabled. Default setting is Enabled. Fatal Error
  • Gigabyte MD30-RS0 | Manual - Page 103
    2-4 Server Management Menu FRB-2 Timer Enable/Disable FRB-2 timer (POST timer). Options available: Enabled/Disabled. Default setting is Disabled. FRB2 Timer timeout Configure the FRB2 Timer timeout. Options available: 3 minutes/4 minutes/5 minutes/6 minutes. Default setting is 6 minutes. Please
  • Gigabyte MD30-RS0 | Manual - Page 104
    System Event Log Press [Enter] for configuration of advanced items. View FRU Information Press [Enter] to view the advanced items. BMC network configuration Press [Enter] for configuration of advanced items. BIOS Setup - 104 -
  • Gigabyte MD30-RS0 | Manual - Page 105
    2-4-1 System Event Log Enabling/Disabling Options SEL Components Change this to enable or disable all features of System Event Logging during boot. Options available: Enabled/Disabled. Default setting is Enabled. Erasing Settings Erasing SEL Choose options for erasing SEL. Options available: No/Yes
  • Gigabyte MD30-RS0 | Manual - Page 106
    2-4-2 View FRU Information The FRU page is a simple display page for basic system ID information, as well as System product information. Items on this window are non-configurable. BIOS Setup - 106 -
  • Gigabyte MD30-RS0 | Manual - Page 107
    2-4-3 BMC network configuration BMC network configuration Select NCSI and Dedicated LAN Switch NCSI and dedicated LAN and send KCS command. Options available: Mode2(NSCI)/ Mode1 (Dedicated)/Do Nothing. Default setting is Do Nothing. Lan Channel 1 Configuration Address source Select to configure LAN
  • Gigabyte MD30-RS0 | Manual - Page 108
    2-5 Security Menu The Security menu allows you to safeguard and protect the system from unauthorized use by setting up access passwords. There are two types of passwords that you can set: • Administrator Password Entering this password will allow the user to access and change all settings in the
  • Gigabyte MD30-RS0 | Manual - Page 109
    automatically load the Secure Boot keys form the BIOS databases. When set to Custom, you can customize the Secure Boot settings and manually load its keys from the BIOS database. Options available: Standard/Custom. Default setting is Standard. Key Management(Note) Press [Enter] for configuration
  • Gigabyte MD30-RS0 | Manual - Page 110
    2-5-1-1 Key Management Default Key Provisioning Force the system to Setup Mode. This will clear all Secure Boot Variables such as Platform Key (PK), Key-exchange Key (KEK), Authorized Signature Database (db), and Forbidden Signaures Database (dbx). Options available: Enabled/Disabled. Default
  • Gigabyte MD30-RS0 | Manual - Page 111
    Append Var to KEK Press [Enter] to load additional KEK from a storage devices for an additional db and dbx management. Authorized Signature Database (DB) Display the status of Authorized Signature Database. Delete DB Press [Enter] to delete the db from your system. Set new DB Press [Enter] to
  • Gigabyte MD30-RS0 | Manual - Page 112
    2-6 Boot Menu The Boot menu allows you to set the drive priority during system boot-up. BIOS setup will display an error message if the legacy drive(s) specified is not bootable. Boot Configuration Setup Prompt Timeout Number of seconds to wait for setup activation key. 65535(0xFFFF) means
  • Gigabyte MD30-RS0 | Manual - Page 113
    Network Device BBS Priorities Press Enter to configure the boot priority. Hard Drive BBS Priorities Press Enter to configure the boot priority. - 113 - BIOS Setup
  • Gigabyte MD30-RS0 | Manual - Page 114
    2-7 Save & Exit Menu The Exit menu displays the various options to quit from the BIOS setup. Highlight any of the exit options then press Enter. Save Changes and Exit Saves changes made and close the BIOS setup. Options available: Yes/No. Discard Changes and Exit Discards changes made and exit the
  • Gigabyte MD30-RS0 | Manual - Page 115
    Boot Override Press Enter to configure the device as the boot-up drive. UEFI: Built-in in EFI Shell Press on this item to Launch EFI Shell from filesystem device. - 115 - BIOS Setup
  • Gigabyte MD30-RS0 | Manual - Page 116
    2-8 BIOS POST Codes PEI_CORE_STARTED 0x10 PEI_CAR_CPU_INIT 0x11 // reserved for CPU 0x12 - 0x14 PEI_CAR_NB_INIT 0x15 // reserved for NB 0x16 - 0x18 PEI_CAR_SB_INIT 0x19 // reserved for SB 0x1A - 0x1C PEI_MEMORY_SPD_READ 0x1D PEI_MEMORY_PRESENCE_DETECT 0x1E PEI_MEMORY_TIMING 0x1F
  • Gigabyte MD30-RS0 | Manual - Page 117
    DXE_CPU_INIT //reserved for CPU 0x64 - 0x67 DXE_NB_HB_INIT DXE_NB_INIT DXE_NB_SMM_INIT //reserved for NB 0x6B - 0x6F DXE_SB_INIT DXE_SB_SMM_INIT DXE_SB_DEVICES_INIT //reserved for SB 0x73 - 0x77 DXE_ACPI_INIT DXE_CSM_INIT //reserved for AMI use: 0x7A - 0x7F //reserved for OEM use: 0x80 - 0x8F
  • Gigabyte MD30-RS0 | Manual - Page 118
    DXE_READY_TO_BOOT DXE_LEGACY_BOOT DXE_EXIT_BOOT_SERVICES RT_SET_VIRTUAL_ADDRESS_MAP_BEGIN RT_SET_VIRTUAL_ADDRESS_MAP_END DXE_LEGACY_OPROM_INIT DXE_RESET_SYSTEM DXE_USB_HOTPLUG DXE_PCI_BUS_HOTPLUG DXE_NVRAM_CLEANUP DXE_CONFIGURATION_RESET //reserved for AMI use: 0xB8 - 0xBF //reserved for OEM use:
  • Gigabyte MD30-RS0 | Manual - Page 119
    PEI_MEMORY_S3_RESUME_FAILED PEI_S3_RESUME_PPI_NOT_FOUND PEI_S3_BOOT_SCRIPT_ERROR PEI_S3_OS_WAKE_ERROR //reserved for AMI use: 0xEC - 0xEF // DXE_STATUS_CODE DXE_CPU_ERROR DXE_NB_ERROR DXE_SB_ERROR DXE_ARCH_PROTOCOL_NOT_AVAILABLE DXE_PCI_BUS_OUT_OF_RESOURCES DXE_LEGACY_OPROM_NO_SPACE DXE_NO_CON_OUT
  • Gigabyte MD30-RS0 | Manual - Page 120
    2-9 BIOS POST Beep code 2-9-1 PEI Beep Codes # of Beeps 1 1 2 3 3 4 4 7 Description Memory not Installed. Memory was installed twice (InstallPeiMemory routine in PEI Core called twice) Recovery started DXEIPL was not found DXE Core Firmware Volume was not found Recovery failed S3 Resume failed
  • Gigabyte MD30-RS0 | Manual - Page 121
    becomes corrupt the boot block can be used to restore the BIOS to a working state. To restore your BIOS, please follow the instructions listed below: Recovery Instruction: 1. Change xxx.ROM to amiboot.rom. 2. Copy amiboot.rom and AFUDOS.exe to USB diskette. 3. Setting BIOS Recovery jump to enabled
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
MD30-RS0
Dual LGA2011 sockets R3 motherboard for Intel
®
E5-2600 V3 series processors
User's Manual
Rev. 1001