Gigabyte W480M VISION W User Manual - Page 34
Super IO Configuration, USB Configuration, Network Stack Configuration
View all Gigabyte W480M VISION W manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 34 highlights
`` Super IO Configuration && Serial Port (Onboard COMA Connector) Enables or disables the onboard serial port. (Default: Enabled) && Serial Port (Onboard COMB Connector) Enables or disables the onboard serial port. (Default: Enabled) `` Serial Port Console Redirection This section allows you to enable/disable serial port console redirection for remote server management through a serial port. `` Intel TXT Information This section displays information about Intel® Trusted Execution Technology. `` USB Configuration && Legacy USB Support Allows USB keyboard/mouse to be used in MS-DOS. (Default: Enabled) && XHCI Hand-off Determines whether to enable XHCI Hand-off feature for an operating system without XHCI Hand-off support. (Default: Enabled) && USB Mass Storage Driver Support Enables or disables support for USB storage devices. (Default: Enabled) && Mass Storage Devices Displays a list of connected USB mass storage devices. This item appears only when a USB storage device is installed. `` Network Stack Configuration && Network Stack Disables or enables booting from the network to install a GPT format OS, such as installing the OS from the Windows Deployment Services server. (Default: Disabled) && IPv4 PXE Support Enables or disables IPv4 PXE Support. This item is configurable only when Network Stack is enabled. && IPv4 HTTP Support Enables or disables HTTP boot support for IPv4. This item is configurable only when Network Stack is enabled. && IPv6 PXE Support Enables or disables IPv6 PXE Support. This item is configurable only when Network Stack is enabled. && IPv6 HTTP Support Enables or disables HTTP boot support for IPv6. This item is configurable only when Network Stack is enabled. && PXE boot wait time Allows you to configure how long to wait before you can press to abort the PXE boot. && Media detect count Allows you to set the number of times to check the presence of media. NVMe Configuration Displays information on your M.2 NVME PCIe SSD if installed. - 34 -