Gigabyte Z590 VISION D User Manual

Gigabyte Z590 VISION D Manual

Get Gigabyte Z590 VISION D PDF manuals and user guides View all Gigabyte Z590 VISION D manuals
Add to My Manuals
Save this manual to your list of manuals

Gigabyte Z590 VISION D manual content summary:

  • Gigabyte Z590 VISION D | User Manual - Page 1
    Z590 VISION D User's Manual Rev. 1001 12ME-Z59VSD-1001R For more product details, please visit GIGABYTE's website. To reduce the impacts on global warming, the packaging materials of this product are recyclable and reusable. GIGABYTE works with you to protect the environment.
  • Gigabyte Z590 VISION D | User Manual - Page 2
    set-up of the product, read the Quick Installation Guide included with the product. „„ For detailed product information, carefully read the User's Manual. For product-related information, check on our website at: https://www.gigabyte.com Identifying Your Motherboard Revision The revision number on
  • Gigabyte Z590 VISION D | User Manual - Page 3
    Table of Contents Box Contents...5 Optional Items...5 Z590 VISION D Motherboard Layout 6 Z590 VISION D Motherboard Block Diagram 7 Chapter 1 Hardware Installation 9 1-1 Installation Precautions 9 1-2 Product Specifications 10 1-3 Installing the CPU and CPU Cooler 14 1-3-1 Installing the CPU
  • Gigabyte Z590 VISION D | User Manual - Page 4
    Channel Audio 91 6-1-2 Configuring S/PDIF Out 93 6-1-3 Stereo Mix...94 6-1-4 Using the Voice Recorder 95 6-1-5 DTS:X® Ultra...96 6-2 Troubleshooting 98 6-2-1 Frequently Asked Questions 98 6-2-2 Troubleshooting Procedure 99 6-3 Debug LED Codes 101 Regulatory Notices 105 Contact Us...111 - 4 -
  • Gigabyte Z590 VISION D | User Manual - Page 5
    Box Contents 55 Z590 VISION D motherboard 55 Motherboard driver disc 55 User's Manual 55 Quick Installation Guide 55 Four SATA cables 55 One antenna 55 M.2 screw(s) 55 One RGB LED strip extension cable 55 One noise detection cable 55 Two thermistor cables
  • Gigabyte Z590 VISION D | User Manual - Page 6
    CPU_FAN CPU_OPT Intel® Thunderbolt™ 4 Controller LGA1200 TYPEC_1 U32G2_2 D_LED2 LED_C2 ATX TYPEC_2 U32G2_1 F_U320G SYS_FAN5_PUMP SYS_FAN2 EC_TEMP2 Z590 VISION D U32_LAN1 U32_LAN2 USB 3.2 Gen 1 Hub F_U32 AUDIO SYS_FAN1 PCIEX16 Intel® 2.5GbE LAN DDR4_A1 DDR4_A2 DDR4_B1 DDR4_B2 M2M_SB
  • Gigabyte Z590 VISION D | User Manual - Page 7
    Z590 VISION D Motherboard Block Diagram PCI Express 4.0 (Note)/3.0 Bus Switch x16 x16 M.2 Socket 2.5GbE LAN RJ45 RJ45 LAN LAN SPI BIOS Bus TPM eSPI iTE® Bus Super I/O Intel® Z590 1 USB Type-C®, with USB 3.2 Gen 2x2 support 2 USB 3.2 Gen 2 Type A USB 3.2 Gen 1 Hub 4 USB 3.2 Gen 1 2
  • Gigabyte Z590 VISION D | User Manual - Page 8
    - 8 -
  • Gigabyte Z590 VISION D | User Manual - Page 9
    (ESD). Prior to installation, carefully read the user's manual and follow these procedures: •• Prior to installation, make sure the user. •• If you are uncertain about any installation steps or have a problem related to the use of the product, please consult a certified computer technician.
  • Gigabyte Z590 VISION D | User Manual - Page 10
    with 4 MB Intel® Smart Cache, Intel® Celeron® G5xx5 family. (Go to GIGABYTE's website for the latest CPU support list.) ŠŠ L3 cache varies with CPU ŠŠ Intel® Z590 Express Chipset ŠŠ 11th Generation Intel® Core™ i9/i7/i5 processors: - Support for DDR4 3200/3000/2933/2666/2400/2133 MHz memory modules
  • Gigabyte Z590 VISION D | User Manual - Page 11
    a PCIe SSD is installed in the M2P_SB connector. 1 x PCI Express x1 slot (The PCIEX4 and PCI Express x1 slots conform to PCI Express 3.0 standard.) Support for AMD Quad-GPU CrossFire™ and 2-Way AMD CrossFire™ technologies CPU: - 1 x M.2 connector (Socket 3, M key, type 2280/22110 PCIe 4.0 x4/x2 SSD
  • Gigabyte Z590 VISION D | User Manual - Page 12
    ŠŠ Fan speed detection ŠŠ Water cooling flow rate detection ŠŠ Fan fail warning ŠŠ Fan speed control * Whether the fan (pump) speed control function is supported will depend on the fan (pump) you install. ŠŠ Noise detection ŠŠ 1 x 256 Mbit flash ŠŠ Use of licensed AMI UEFI BIOS ŠŠ PnP 1.0a, DMI
  • Gigabyte Z590 VISION D | User Manual - Page 13
    and product-related information without prior notice. Please visit GIGABYTE's website for support lists of CPU, memory modules, SSDs, and M.2 devices. - 13 - Please visit the Support\Utility List page on GIGABYTE's website to download the latest version of apps. Hardware Installation
  • Gigabyte Z590 VISION D | User Manual - Page 14
    and CPU Cooler Read the following guidelines before you begin to install the CPU: •• Make sure that the motherboard supports the CPU. (Go to GIGABYTE's website for the latest CPU support list.) •• Always turn off the computer and unplug the power cord from the power outlet before installing the CPU
  • Gigabyte Z590 VISION D | User Manual - Page 15
    B. Follow the steps below to correctly install the CPU into the motherboard CPU socket. •• Before installing the CPU, make sure to turn off the computer and unplug the power cord from the power outlet to prevent damage to the CPU. •• To protect the socket contacts, do not remove the protective
  • Gigabyte Z590 VISION D | User Manual - Page 16
    " when pushing down each push pin. Check that the Male and Female push pins are joined closely. (Refer to your CPU cooler installation manual for instructions on installing the cooler.) Step 5: After the installation, check the back of the motherboard. If the push pin is inserted as the picture
  • Gigabyte Z590 VISION D | User Manual - Page 17
    the memory. It is recommended that memory of the same capacity, brand, speed, and chips be used. (Go to GIGABYTE's website for the latest supported memory speeds and memory modules.) •• Always turn off the computer and unplug the power cord from the power outlet before installing the memory to
  • Gigabyte Z590 VISION D | User Manual - Page 18
    1-4-2 Installing a Memory Before installing a memory module, make sure to turn off the computer and unplug the power cord from the power outlet to prevent damage to the memory module. DDR4 and DDR3 DIMMs are not compatible to each other or DDR2 DIMMs. Be sure to install DDR4 DIMMs on this
  • Gigabyte Z590 VISION D | User Manual - Page 19
    Installing an Expansion Card Read the following guidelines before you begin to install an expansion card: •• Make sure the motherboard supports the expansion card. Carefully read the manual that came with your expansion card. •• Always turn off the computer and unplug the power cord from the power
  • Gigabyte Z590 VISION D | User Manual - Page 20
    Requirements -- Windows 10 64-bit operating system -- A CrossFire-supported motherboard with two PCI Express x16 slots and correct driver -- -- A power supply with sufficient power is recommended (Refer to the manual of your graphics cards for the power requirement) B. Connecting the Graphics
  • Gigabyte Z590 VISION D | User Manual - Page 21
    up to 192KHz/16bit 7.1-channel LPCM audio output. You can use this port to connect your HDMI-supported monitor. The maximum supported resolution is 4096x2160@30 Hz, but the actual resolutions supported are dependent on the monitor being used. After installing the HDMI device, make sure to set the
  • Gigabyte Z590 VISION D | User Manual - Page 22
    Gen 1 and USB 2.0 specification. Use this port for USB devices. VisionLINK TB Connector (Thunderbolt™ 4/USB Type-C® Port) The connector supports GIGABYTE's VisionLINK technology. It is based on the Thunderbolt™ 4 specification and has display and data transmission capabilities with 20V@3A (60W) of
  • Gigabyte Z590 VISION D | User Manual - Page 23
    this audio jack for line in devices such as an optical drive, walkman, etc. Line Out/Front Speaker Out The line out jack. This jack supports audio amplifying function. For better sound quality, it is recommended that you connect your headphone/speaker to this jack (actual effects may vary by the
  • Gigabyte Z590 VISION D | User Manual - Page 24
    1-8 Internal Connectors 41 63 8 9 2 4 5 16 7 15 12 11 12 12 10 7 19 14 8 9 18 17 20 21 4 5 13 22 1) ATX_12V_2X2/ATX_12V_2X4 2) ATX 3) CPU_FAN 4) SYS_FAN1/2/3/4 5) SYS_FAN5/6_PUMP 6) CPU_OPT 7) EC_TEMP1/EC_TEMP2 8) D_LED1/D_LED2 9) LED_C1/LED_C2 10) NOISE_SENSOR 11) SATA3 0/1/2/3/4/5 12
  • Gigabyte Z590 VISION D | User Manual - Page 25
    1/2) A TX_12V_2X2/ATX_12V_2X4/ATX (2x2, 2x4, 12V Power Connectors and 2x12 Main Power Connector) With the use of the power connector, the power supply can supply enough stable power to all the components on the motherboard. Before connecting the power connector, first make sure the power supply is
  • Gigabyte Z590 VISION D | User Manual - Page 26
    3/4) CPU_FAN/SYS_FAN1/2/3/4 (Fan Headers) All fan headers on this motherboard are 4-pin. Most fan headers possess a foolproof insertion design. When connecting a fan cable, be sure to connect it in the correct orientation (the black connector wire is the ground wire). The speed control function
  • Gigabyte Z590 VISION D | User Manual - Page 27
    6) CPU_OPT (Water Cooling CPU Fan Header) The fan header is 4-pin and possesses a foolproof insertion design. Most fan headers possess a foolproof insertion design. When connecting a fan cable, be sure to connect it in the correct orientation (the black connector wire is the ground wire). The speed
  • Gigabyte Z590 VISION D | User Manual - Page 28
    LED strip. B R G 12V B R G 12V B R G 12V B R G 12V RGB LED Strip For how to turn on/off the lights of the LED strip, refer to the instructions on in Chapter 5, "Unique Features," "APP Center\RGB Fusion." Before installing the devices, be sure to turn off the devices and your computer. Unplug the
  • Gigabyte Z590 VISION D | User Manual - Page 29
    with SATA 3Gb/s and SATA 1.5Gb/s standard. Each SATA connector supports a single SATA device. The Intel® Chipset supports RAID 0, RAID 1, RAID 5, and RAID 10. Refer to Chapter 3, "Configuring a RAID Set," for instructions on configuring a RAID array. G.QBOFM G.QBOFM G.QBOFM 7 7 SATA3 5 3 1 420
  • Gigabyte Z590 VISION D | User Manual - Page 30
    the heatsink and secure it to the original hole. Remove the protective film from the bottom of the heatsink before replacing the heatsink. (Note) Supported by 11th Generation processors only. Be sure to use Intel® SSDs if you want to set up a RAID configuration on the M2A_CPU connector. Hardware
  • Gigabyte Z590 VISION D | User Manual - Page 31
    0 M.2 PCIe SSD * a SATA3 1 a SATA3 2 a SATA3 3 a SATA3 4 a SATA3 5 a No M.2 SSD Installed a a a a a a a: Available, r: Not available * The M2A_CPU connector supports only PCIe SSDs. •• M2M_SB: Type of Connector M.2 SSD M.2 SATA SSD SATA3 0 a M.2 PCIe SSD a No M.2 SSD Installed
  • Gigabyte Z590 VISION D | User Manual - Page 32
    speaker on the chassis front panel. The system reports system startup status by issuing a beep code. One single short beep will be heard if no problem is detected at system startup. •• HD (Hard Drive Activity LED): Connects to the hard drive activity LED on the chassis front panel. The LED is
  • Gigabyte Z590 VISION D | User Manual - Page 33
    audio module that has different wire assignments, please contact the chassis manufac_tuSrer. 1 23 1 15) F_U320G (USB Type-C® Header with USB 3.2 Gen 2x2 Support) The header conforms to USB 3.2 Gen 2x2 specificSation and can provide one USB port. _F _0 F F_ _3 U _ B 1 23 1 1 23 1 B_ USB
  • Gigabyte Z590 VISION D | User Manual - Page 34
    16) F_U32 (USFB_US3B.320 Gen 1 Header) F_ U F_ The header conforms to USB 3.2 Gen 1 and USB 2.0 specification and can provide two USB ports. For purchasing the optional 3.5" front panel that provides two USB 3.2 Gen 1 ports, please contact the local dealer. Pin No. Definition Pin No.
  • Gigabyte Z590 VISION D | User Manual - Page 35
    from the power outlet before clearing the CMOS values. •• After system restart, go to BIOS Setup to load factory defaults (select Load Optimized Defaults) or manually configure the BIOS settings (refer to Chapter 2, "BIOS Setup," for BIOS configurations). - 35 - Hardware Installation
  • Gigabyte Z590 VISION D | User Manual - Page 36
    20) BAT (Battery) The battery provides power to keep the values (such as BIOS configurations, date, and time information) in the CMOS when the computer is turned off. Replace the battery when the battery voltage drops to a low level, or the CMOS values may not be accurate or may be lost. You may
  • Gigabyte Z590 VISION D | User Manual - Page 37
    S_ 22) CPU/DRAM/VGA/BOOT (Status LEDs) The status LEDs show whether the CPU, memory, graphics card, and operating system are working properly after system power-on. If the CPU/DRAM/VGA LED is on, that means the corresponding device is not working normally; if the BOOT LED is on, that means you
  • Gigabyte Z590 VISION D | User Manual - Page 38
    Hardware Installation - 38 -
  • Gigabyte Z590 VISION D | User Manual - Page 39
    on. To upgrade the BIOS, use either the GIGABYTE Q-Flash or @BIOS utility. •• Q-Flash allows the from the Internet and updates the BIOS. For instructions on using the Q-Flash and @BIOS utilities, is potentially risky, if you do not encounter problems using the current version of BIOS, it is
  • Gigabyte Z590 VISION D | User Manual - Page 40
    2-1 Startup Screen The following startup Logo screen will appear when the computer boots. Function Keys Function Keys: : BIOS SETUP\Q-FLASH Press the key to enter BIOS Setup or to access the Q-Flash utility in BIOS Setup. : BOOT MENU Boot Menu allows you to set the first boot
  • Gigabyte Z590 VISION D | User Manual - Page 41
    2-2 The Main Menu Advanced Mode The Advanced Mode provides detailed BIOS settings. You can press the arrow keys on your keyboard to move among the items and press to accept or enter a sub-menu. Or you can use your mouse to select the item you want. Setup Menus System Time Configuration
  • Gigabyte Z590 VISION D | User Manual - Page 42
    B. Easy Mode Easy Mode allows users to quickly view their current system information or to make adjustments for optimum performance. In Easy Mode, you can use your mouse to move through configuration items or press to switch to the Advanced Mode screen. BIOS Setup - 42 -
  • Gigabyte Z590 VISION D | User Manual - Page 43
    . You can adjust the fan speed with System Information Viewer based on your system requirements. (Default) Silent Allows the fan to run at slow speeds. Manual Allows you to drag the curve nodes to adjust fan speed. Or you can use the EZ Tuning feature. After adjusting the node position
  • Gigabyte Z590 VISION D | User Manual - Page 44
    && FAN/PUMP Stop Enables or disables the fan/pump stop function. You can set the temperature limit using the temperature curve. The fan or pump stops operation when the temperature is lower than the limit. (Default: Disabled) && FAN/PUMP Mode Allows you to set the operating mode for the fan. Slope
  • Gigabyte Z590 VISION D | User Manual - Page 45
    2-4 Favorites (F11) Set your frequently used options as your favorites and use the key to quickly switch to the page where all of your favorite options are located. To add or remove a favorite option, go to its original page and press on the option. The option is marked with a star
  • Gigabyte Z590 VISION D | User Manual - Page 46
    , Advanced Profile. (Default: Default) && CPU Base Clock Allows you to manually set the CPU base clock in 0.01 MHz increments. (Default: Auto) Important Note) This item is present only when you install a CPU that supports this feature. For more information about Intel® CPUs' unique features, please visit Intel's
  • Gigabyte Z590 VISION D | User Manual - Page 47
    && AVX Disable (Note) Allows you to disable the AVX instruction sets on a CPU that supports AVX. (Default: Auto) && AVX512 Disable (Note) Allows you to disable the AVX-512 instruction sets on a CPU that supports AVX-512. (Default: Auto) && AVX Offset (Note) When the processor runs AVX workloads, the
  • Gigabyte Z590 VISION D | User Manual - Page 48
    system to identify the processor's best performance core and lets you manually direct the most critical workloads to it. You can even adjust ) (Note) This item is present only when you install a CPU that supports this feature. For more information about Intel® CPUs' unique features, please visit
  • Gigabyte Z590 VISION D | User Manual - Page 49
    CPU specifications. This item is configurable only when Active Turbo Ratios is set to Manual. (Default: Auto) dd Per Core HT Disable Setting && HT Disable ( when C-States Control is set to Enabled. (Default: Auto) && C8 State Support (Note) Allows you to determine whether to let the CPU enter C8 mode
  • Gigabyte Z590 VISION D | User Manual - Page 50
    memory multiplier according to memory SPD data. (Default: Auto) && Memory Ref Clock Allows you to manually adjust the memory reference clock. (Default: Auto) && Memory Odd Ratio (100/133 or 200/266 only when you install a CPU and a memory module that support this feature. BIOS Setup - 50 -
  • Gigabyte Z590 VISION D | User Manual - Page 51
    ƒƒ Advanced Memory Settings && Memory Multiplier Tweaker Provides different levels of memory auto-tuning. (Default: Auto) && Channel Interleaving Enables or disables memory channel interleaving. Enabled allows the system to simultaneously access different channels of the memory to increase
  • Gigabyte Z590 VISION D | User Manual - Page 52
    ƒƒ SPD Info Displays information on the installed memory. ƒƒ Memory Channels Timings dd Channels Standard Timing Control, Channels Advanced Timing Control, Channels Misc Timing Control These sections provide memory timing settings. Note: Your system may become unstable or fail to boot after you
  • Gigabyte Z590 VISION D | User Manual - Page 53
    2-6 Settings ƒƒ Platform Power && Platform Power Management Enables or disables the Active State Power Management function (ASPM). (Default: Disabled) && PEG ASPM Allows you to configure the ASPM mode for the device connected to the CPU PEG bus. This item is configurable only when Platform Power
  • Gigabyte Z590 VISION D | User Manual - Page 54
    && Soft-Off by PWR-BTTN Configures the way to turn off the computer in MS-DOS mode using the power button. Instant-Off Press the power button and then the system will be turned off instantly. (Default) Delay 4 Sec. Press and hold the power button for 4 seconds to turn off the system. If the
  • Gigabyte Z590 VISION D | User Manual - Page 55
    first display. PCIe 3 Slot Sets the graphics card on the PCIEX4 slot as the first display. This item is configurable only when CSM Support is set to Enabled. && Internal Graphics Enables or disables the onboard graphics function. (Default: Auto) && DVMT Pre-Allocated Allows you to set the
  • Gigabyte Z590 VISION D | User Manual - Page 56
    Disables or enables booting from the network to install a GPT format OS, such as installing the OS from the Windows Deployment Services server. (Default: Disabled) && IPv4 PXE Support Enables or disables IPv4 PXE Support. This item is configurable only when Network Stack is enabled. && IPv4 HTTP
  • Gigabyte Z590 VISION D | User Manual - Page 57
    allows the storage driver to enable advanced Serial ATA features such as Native Command Queuing and hot plug. (Default) && Aggressive LPM Support Enables or disables the power saving feature, ALPM (Aggressive Link Power Management), for the Chipset SATA controllers. (Default: Disabled) && Port
  • Gigabyte Z590 VISION D | User Manual - Page 58
    Technology for Directed I/O. (Default: Enabled) ƒƒ Trusted Computing Enables or disables Trusted Platform Module (TPM). (Note) This item is present only when you install a CPU that supports this feature. BIOS Setup - 58 -
  • Gigabyte Z590 VISION D | User Manual - Page 59
    ƒƒ PC Health Status && Reset Case Open Status Disabled Keeps or clears the record of previous chassis intrusion status. (Default) Enabled Clears the record of previous chassis intrusion status and the Case Open field will show "No" at next boot. && Case Open Displays the detection status of
  • Gigabyte Z590 VISION D | User Manual - Page 60
    Info. This section provides information on your motherboard model and BIOS version. You can also select the default language used by the BIOS and manually set the system time. && Access Level Displays the current access level depending on the type of password protection used. (If no password is set
  • Gigabyte Z590 VISION D | User Manual - Page 61
    Logo at system startup. Disabled skips the GIGABYTE Logo when the system starts up. (Default: Enabled) && Boot Option Priorities Specifies the overall boot order from the available devices. Removable storage devices that support GPT format will be prefixed with "UEFI:" string on the boot device
  • Gigabyte Z590 VISION D | User Manual - Page 62
    Allows you to select whether to enable the legacy option ROM for the LAN controller. (Default: Disabled) This item is configurable only when CSM Support is set to Enabled. && Storage Boot Option Control Allows you to select whether to enable the UEFI or legacy option ROM for the storage device
  • Gigabyte Z590 VISION D | User Manual - Page 63
    Password first. ƒƒ Secure Boot Allows you to enable or disable Secure Boot and configure related settings. This item is configurable only when CSM Support is set to Disabled. && Preferred Operating Mode Allows you to select whether to enter Easy mode or Advanced mode after entering BIOS Setup
  • Gigabyte Z590 VISION D | User Manual - Page 64
    2-9 Save & Exit && Save & Exit Setup Press on this item and select Yes. This saves the changes to the CMOS and exits the BIOS Setup program. Select No or press to return to the BIOS Setup Main Menu. && Exit Without Saving Press on this item and select Yes. This exits the BIOS
  • Gigabyte Z590 VISION D | User Manual - Page 65
    Chapter 3 Configuring a RAID Set RAID Levels RAID 0 Minimum Number of Hard ≥2 Drives Number of hard Array Capacity drives * Size of the smallest drive Fault Tolerance No RAID 1 RAID 5 2 ≥3 Size of the smallest drive Yes (Number of hard drives -1) * Size of the smallest drive Yes RAID
  • Gigabyte Z590 VISION D | User Manual - Page 66
    1). Note: When using a PCIe SSD, make sure to set the RST Control PCIe Storage Devices item under Settings\IO Ports\SATA And RST Configuration to Manual. Then depending the M.2 connector you use, set the corresponding PCIe Storage Dev on Port XX item to RST Controlled. Finally, save the settings and
  • Gigabyte Z590 VISION D | User Manual - Page 67
    with 1~16 letters (letters cannot be special characters) under the Name item and press . Then, select a RAID level (Figure 3). RAID levels supported include RAID 0, RAID 1, RAID 10, and RAID 5 (the selections available depend on the number of the hard drives being installed). Next, use the
  • Gigabyte Z590 VISION D | User Manual - Page 68
    Step 4: After setting the capacity, move to Create Volume and press to begin. (Figure 5) Figure 5 After completing, you'll be brought back to the Intel(R) Rapid Storage Technology screen. Under RAID Volumes you can see the new RAID volume. To see more detailed information, press on
  • Gigabyte Z590 VISION D | User Manual - Page 69
    Delete RAID Volume To delete a RAID array, press on the volume to be deleted on the Intel(R) Rapid Storage Technology screen. After entering the RAID VOLUME INFO screen, press on Delete to enter the Delete screen. Press on Yes (Figure 7). Figure 7 - 69 - Configuring a RAID
  • Gigabyte Z590 VISION D | User Manual - Page 70
    3-2 Installing the RAID Driver and Operating System With the correct BIOS settings, you are ready to install the operating system. As some operating systems already include RAID driver, you do not need to install separate RAID driver during the Windows installation process. After the operating
  • Gigabyte Z590 VISION D | User Manual - Page 71
    Memory and Storage Management to install and follow the on-screen instructions to complete the installation. When completed, restart the system. RST Configuration and make sure RST Control PCIe Storage Devices is set to Manual. Then depending on which M.2 connector you install the Optane™ memory in
  • Gigabyte Z590 VISION D | User Manual - Page 72
    Step 3: Launch the Intel® Optane™ Memory and Storage Management application from the Start menu and make sure the Intel® Optane™ Memory has been enabled. Step 4: If you want to accelerate the system drive, you can select specific folders, files, or applications to accelerate using the Intel® Optane
  • Gigabyte Z590 VISION D | User Manual - Page 73
    B. Rebuilding an Array Rebuilding is the process of restoring data to a hard drive from other drives in the array. Rebuilding applies only to fault-tolerant arrays such as RAID 1, RAID 5 or RAID 10 arrays. The procedures below assume a new drive is added to replace a failed drive to rebuild a RAID 1
  • Gigabyte Z590 VISION D | User Manual - Page 74
    Configuring a RAID Set - 74 -
  • Gigabyte Z590 VISION D | User Manual - Page 75
    Chapter 4 Drivers Installation •• Before installing the drivers, first install the operating system. •• After installing the operating system, insert the motherboard driver disk into your optical drive. Click on the message "Tap to choose what happens with this disc" on the top-right corner of the
  • Gigabyte Z590 VISION D | User Manual - Page 76
    4-2 Application Software This page displays the apps that GIGABYTE develops and some free software. You can select the apps you want and drivers on the driver disk. The Contact page provides contact information of the GIGABYTE Taiwan headquarter. You can click the URL on this page to link to the
  • Gigabyte Z590 VISION D | User Manual - Page 77
    motherboards provide two unique BIOS update tools, Q-Flash™ and @BIOS™. GIGABYTE Q-Flash and @BIOS are easy-to-use and allow you to update the BIOS without the need to enter MS-DOS mode. Additionally, this motherboard supports Q-Flash Plus, providing multiple protection for the safety and stability
  • Gigabyte Z590 VISION D | User Manual - Page 78
    the computer. In the main screen of Q-Flash, select Update BIOS. •• The Save BIOS option allows you to save the current BIOS file. •• Q-Flash only supports USB flash drive or hard drives using FAT32/16/12 file system. •• If the BIOS update file is saved to a hard drive in RAID/AHCI
  • Gigabyte Z590 VISION D | User Manual - Page 79
    Step 2: The screen will show that the BIOS file is being read from your USB flash drive. Please select Fast or Intact to begin the BIOS update. The screen will then display the update process. •• Do not turn off or restart the system when the system is reading/updating the BIOS. •• Do not remove the
  • Gigabyte Z590 VISION D | User Manual - Page 80
    the @BIOS server site, please manually download the BIOS update file from GIGABYTE's website and follow the instructions in "Update the BIOS without up screen. Click Backup current image to save the current boot-up logo. Supported image formats include jpg, bmp, and gif. C. After Updating the BIOS
  • Gigabyte Z590 VISION D | User Manual - Page 81
    downloaded BIOS file, save it to your USB flash drive, and rename it to GIGABYTE.bin. Note: The USB flash drive must use the FAT32/16 file system and when the BIOS flashing is complete. •• If you choose to update the BIOS manually, first make sure that your system is off (S5 shutdown state). •• If
  • Gigabyte Z590 VISION D | User Manual - Page 82
    . On the Autorun screen, go to Application Software\Install GIGABYTE Utilities to install GIGABYTE App Center and the selected apps. Restart your computer after in APP Center may differ by motherboard model. Supported functions of each application may also vary depending on motherboard specifications. Unique
  • Gigabyte Z590 VISION D | User Manual - Page 83
    5-2-1 EasyTune GIGABYTE's EasyTune is a simple and easy-to-use interface that allows and CPU. Grayed-out area(s) indicates that the item is not configurable or the function is not supported. Incorrectly doing overclock/overvoltage may result in damage to the hardware components such as CPU, chipset,
  • Gigabyte Z590 VISION D | User Manual - Page 84
    5-2-2 Fast Boot Through the simple GIGABYTE Fast Boot interface, you can enable or change the Fast Boot or Next Boot After AC Power Loss setting right in the operating system. The
  • Gigabyte Z590 VISION D | User Manual - Page 85
    5-2-3 Game Boost This app allows you to flexibly manage your applications to optimize your gaming performance by freeing up system resources and memory usage. The Game Boost Interface Using Game Boost Select the application you want to suspend and then click Go to optimize your system for gaming.
  • Gigabyte Z590 VISION D | User Manual - Page 86
    the Windows environment. The RGB Fusion Interface Using RGB Fusion •• The icon on the top right corner: Allows your computer to connect to the GIGABYTE RGB Fusion app installed on your handheld devices. (Note 2) •• Click the icon of the desired device and select the LED color/ lighting behaviour
  • Gigabyte Z590 VISION D | User Manual - Page 87
    •• Options for controlling the LEDs on the motherboard and digital LED strip. Click the motherboard icon for further settings. (Note) Select your desired area and select the LED color/ lighting behaviour on the right section of the screen. Static The selected region LEDs emit a single color.
  • Gigabyte Z590 VISION D | User Manual - Page 88
    to recover your system from the backup image •• Smart Backup only supports NTFS file system. •• You need to select the destination partition in the backup and enter the user name and password. Follow the on-screen instructions to complete. Recovering a file: Click the File Recovery button on the
  • Gigabyte Z590 VISION D | User Manual - Page 89
    to proceed with the restore immediately or later. Once you respond "Yes" the system will restart to the Windows recovery environment. Follow the onscreen instructions to restore your system. All of your files and programs will be deleted and replaced with those on the selected backup. If needed, be
  • Gigabyte Z590 VISION D | User Manual - Page 90
    5-2-6 System Information Viewer GIGABYTE System Information Viewer allows you to monitor and adjust the fan speed in the operating system. You can also display the hardware monitor information on
  • Gigabyte Z590 VISION D | User Manual - Page 91
    provides five audio jacks on the back panel which support 2/4/5.1/7.1-channel audio. The picture to the right shows the Start menu click the Realtek Audio Console. For speaker connection, refer to the instructions in Chapter 1, "Hardware Installation," "Back Panel Connectors." Step 2: Connect an
  • Gigabyte Z590 VISION D | User Manual - Page 92
    on the front panel and then go to the Speaker page. Enable the Smart Headphone Amp feature. The Headphone Power list below allows you to manually set the level of headphone volume, preventing the volume from being too high or too low. * Configuring the Headphone When you connect your headphone to
  • Gigabyte Z590 VISION D | User Manual - Page 93
    Step 2: Select Sound Control Panel. Step 3: On the Playback tab, make sure your headphone is set as the default playback device. For the device connected to the Line out jack on the back panel, right-click on Speakers and select Set as Default Device; for the device connected to the Line out jack
  • Gigabyte Z590 VISION D | User Manual - Page 94
    2. Configuring S/PDIF Out: On the Realtek Digital Output screen, Select the sample rate and bit depth in the Default Format section. 6-1-3 Stereo Mix The following steps explain how to enable Stereo Mix (which may be needed when you want to record sound from your computer). Step 1: Locate the icon
  • Gigabyte Z590 VISION D | User Manual - Page 95
    will saved in Documents>Sound Recordings. Voice Recorder records audio in MPEG-4 (.m4a) format. You can play the recording with a digital media player program that supports the audio file format. - 95 - Appendix
  • Gigabyte Z590 VISION D | User Manual - Page 96
    an advanced audio solution that renders sounds above, around, and close to you, stepping up your game play to new levels. Now with support for Microsoft Spatial sound. Key features include: •• Believable 3D audio DTS latest spatial audio rendering that delivers believable 3D audio over headphones
  • Gigabyte Z590 VISION D | User Manual - Page 97
    2: The system will connect to the Microsoft Store. When the DTS Sound Unbound application appears, click Install and follow the on-screen instructions to proceed with the installation. Step 3: After the DTS Sound Unbound application is installed, click Launch. Accept the End User License Agreement
  • Gigabyte Z590 VISION D | User Manual - Page 98
    6-2 Troubleshooting 6-2-1 Frequently Asked Questions To read more FAQs for your motherboard, please go to the Support\FAQ page on GIGABYTE's website. Q: If your board doesn't have this jumper/button, refer to the instructions on the motherboard battery in Chapter 1. You can temporarily remove the
  • Gigabyte Z590 VISION D | User Manual - Page 99
    If you encounter any troubles during system startup, follow the troubleshooting procedure below to solve the problem. START Turn off memory slot. No Correctly insert the memory into the memory socket. Yes The problem is verified and solved. Insert the graphics card. Connect the ATX main power
  • Gigabyte Z590 VISION D | User Manual - Page 100
    the device works successfully). The problem is verified and solved. END If the procedure above is unable to solve your problem, contact the place of purchase or local dealer for help. Or go to the Support\Technical Support page to submit your question. Our customer service staff will reply you as
  • Gigabyte Z590 VISION D | User Manual - Page 101
    initialization. IOH PEI initialization. PCH PEI initialization. Reserved. DXE Core is started. NVRAM initialization. Installation of the PCH runtime services. CPU DXE initialization is started. PCI host bridge initialization is started. IOH DXE initialization. IOH SMM initialization. Reserved. PCH
  • Gigabyte Z590 VISION D | User Manual - Page 102
    Setup is started. Reserved. Wait user command in BIOS Setup. Reserved. Issue Ready To Boot event for OS Boot. Boot to Legacy OS. Exit Boot Services. Runtime AP installation begins. Runtime AP installation ends. Legacy Option ROM initialization. System reset if needed. Appendix - 102 -
  • Gigabyte Z590 VISION D | User Manual - Page 103
    Code B4 B5 B6 B7 B8~BF C0~CF Description USB device hot plug-in. PCI device hot plug. Clean-up of NVRAM. Reconfigure NVRAM settings. Reserved. Reserved. S3 Resume Code E0 E1 E2 E3 Recovery Code F0 F1 F2 F3 F4 F5~F7 Error Code 50~55 56 57 58 59 5A 5B 5C~5F D0 D1 Description S3 Resume is started (
  • Gigabyte Z590 VISION D | User Manual - Page 104
    Code D2 D3 D4 D5 D6 D7 D8 D9~DA DB DC DE~DF E8 E9 EA EB EC~EF F8 F9 FA FB~FF Description PCH initialization error. Some of the Architectural Protocols are not available. PCI resource allocation error. Out of Resources. No Space for Legacy Option ROM initialization. No Console Output Devices are
  • Gigabyte Z590 VISION D | User Manual - Page 105
    Compliance Information Product Name: Motherboard Trade Name: GIGABYTE Model Number: Z590 VISION D Responsible Party - U.S. Contact Information: 1992. Proper operation of this radio according to the instructions found in this manual will result in exposure substantially below the FCC's recommended
  • Gigabyte Z590 VISION D | User Manual - Page 106
    2011/65/EU & the European Commission Delegated Directive (EU) 2015/863 Statement GIGABYTE products have not intended to add and safe from hazardous substances (Cd, Pb contact your local government office, your household waste disposal service or where you purchased the product for details of
  • Gigabyte Z590 VISION D | User Manual - Page 107
    European Community Radio Equipment Directive Compliance Statement: This equipment complies with all the requirements and other relevant provisions of Radio Equipment Directive 2014/53/EU. This equipment is suitable for home and office use in all the European Community Member States and EFTA Member
  • Gigabyte Z590 VISION D | User Manual - Page 108
    Appendix - 108 -
  • Gigabyte Z590 VISION D | User Manual - Page 109
    - 109 - Appendix
  • Gigabyte Z590 VISION D | User Manual - Page 110
    Appendix - 110 -
  • Gigabyte Z590 VISION D | User Manual - Page 111
    , Taiwan TEL: +886-2-8912-4000 FAX: +886-2-8912-4005 Tech. and Non-Tech. Support (Sales/Marketing) : https://esupport.gigabyte.com WEB address (English): https://www.gigabyte.com WEB address (Chinese): https://www.gigabyte.com/tw •• G.B.T. INC. - U.S.A. TEL: +1-626-854-9338 FAX: +1-626-854-9326 Tech
  • Gigabyte Z590 VISION D | User Manual - Page 112
    .ru/ •• Poland WEB address: http://www.gigabyte.pl/ •• Ukraine WEB address: http://www.gigabyte.ua/ •• Romania WEB address: https://www.gigabyte.com/ro •• Serbia WEB address: http://www.gigabyte.rs/ •• Kazakhstan WEB address: http://www.gigabyte.kz/ •• GIGABYTE eSupport To submit a technical or non
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
Z590 VISION D
User's Manual
Rev. 1001
12ME-Z59VSD-1001R
For more product details, please visit GIGABYTE's website.
To reduce the impacts on global warming, the packaging materials of this product are
recyclable and reusable. GIGABYTE works with you to protect the environment.