Graco 1751929 Owners Manual - Page 24
With a Vehicle Lap/Shoulder Belt
UPC - 047406103775
View all Graco 1751929 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 24 highlights
7.2 With a Vehicle Lap/Shoulder Belt When using an approved combination lap/shoulder belt, this child restraint is equipped with a lock-off that is used to secure the shoulder portion of the belt so it will not loosen or shift during use. You must use the lock-off provided on the child restraint whenever you are using a combination lap/shoulder belt to secure your child restraint. Before beginning, make sure that LATCH is stored. See Section 8.1, Storing LATCH and Tether, page 32. If your vehicle is equipped with tether anchor points, remove the tether clip from the storage bar, otherwise make sure that the tether is stored. 1. Place the child restraint firmly against the back of a forward-facing vehicle seat. 2. NEVER place the vehicle belt over the top of the child restraint. Recline the child restraint and thread the vehicle belt through the belt path. 3. Buckle the vehicle belt . The vehicle belt should not be twisted or turned. 24