HTC Touch GSM Read Me First - Page 2

Before Using Your Device A. Remove the back cover Slide the back cover upward to remove it. C. Install the microSD™ card and SIM card 1 Pry open the cover that houses the SIM and storage card slots. To open the cover easier, pry it open from both ends. 2 Flip your device so that the touch screen faces upward. 3 Hold open the slot cover with one hand. B. Install the battery Insert the right side of the battery first, with the gold contacts facing to the right, then gently push the battery into place. Slot cover 4 The upper slot is the microSD slot. Insert the microSD card into this slot with gold contacts facing down. 5 The lower slot is the SIM card slot. Insert the SIM card with its gold contacts facing down and its cut-off corner facing toward the inside of the slot. Note To remove the SIM card or microSD card, press it to pop it out of the slot. 6 Replace the back cover. D. Charge the battery The battery is not fully charged out of the box. To charge the battery inside your device, connect the AC adapter plug to an electrical outlet and connect the USB end to the Sync connector at the bottom of your device. The battery is fully charged after about 3 hours of charging. E. Power on/off the device Press and hold the POWER button for about 3 seconds to power on your device. When powering off, a confirmation message will be displayed. Tap Yes to power off the device. Quick Setup Wizard When you power on your device for the first time, a Quick Start Wizard will guide you through touch screen calibration, provide a quick tutorial on stylus operation and pop-up menus, and allow you to set the date, time and a device password. Follow the on-screen instructions to complete the wizard. The Touch Phone Power Earpiece Stylus Volume Slider Touch Screen Camera Talk End Navigation Control / ENTER HTC Home HTC Home is a Today screen plug-in that gives you up-to-date local information at a glance, such as time, day and weather information, and shows new messages and missed calls. It also has a customizable launcher where you can add your favorite applications for one-touch access. TouchFLO™ TouchFLO™ gives you better touch panel experience on your device. Using TouchFLO, you can easily scroll and pan the screen by sliding your finger on the touch panel. TouchFLO also has the Touch Cube where you can add your favorite contacts, access media, launch programs, and more. Finger scrolling While on a Web page, document, or list (such as contacts list, file list, etc.), slide your finger upward to scroll down; slide your finger downward to scroll up. To scroll to the right, slide your finger to the left. To scroll to the left, slide your finger to the right. Finger panning Touch and hold on the touch screen and then drag your finger around the screen. Touch Cube To open the Touch Cube, slide your finger upward, starting from the bottom of the touch screen where it shows a logo image. To close the Touch Cube, slide your finger downward. Touch Cube is a three-dimensional, cubic user interface. To flip the interface from one side to another, slide your finger left or right on the touch screen. Opening the Touch Cube Make that First Call 1 Press the TALK button to open the Phone screen. 2 Touch or tap the keys on the Phone screen to enter the first few digits of a phone number or the beginning letters of a contact name. 3 The Smart Dialing panel will display the matching phone numbers in Call History as well as the matching contacts found on your device and SIM card. Select the number or contact you want to call then press TALK. Smart Dialing Panel TALK Button For hands-free phone conversation, connect the USB stereo headset or a Bluetooth® headset (not included) to your device. To learn how to connect a Bluetooth headset, refer to the User Manual. Synchronize Your Device and PC Synchronize your device with your PC to keep information such as Outlook e-mails, contacts, tasks, and appointments up-to-date on your device. Set up synchronization software on your PC Depending on the Operating System of your PC, you will need either Microsoft ActiveSync® 4.5 (or later) or Windows Mobile® Device Center to synchronize your device with your PC. Set up ActiveSync on Windows XP 1 Install ActiveSync 4.5 on your PC from the Getting Started Disc. Set up Windows Mobile Device Center on Windows Vista™ 2 Connect your device to your PC. The Synchronization Setup Wizard automatically starts and guides you to create a synchronization partnership. Click Next to proceed. 3 To synchronize your device with your PC, clear the Synchronize directly with a server running Microsoft Exchange check box and click Next. 1 Connect your device to your PC. In Windows Mobile Device Center, click Set up your device. 2 Select the information you want to synchronize and click Next. 4 Select the information types that you want to synchronize, then click Next. 5 Choose whether to allow wireless connections while your device is connected to the PC. 6 Click Finish. 3 Type in a name for your device and click Set Up.