Haier 21F3A User Manual - Page 8

Power On and Power Off Below are methods on how to power on/off the TV set with the switch on the TV and on the remote control. Power on/off Signal receiver Power switch Power indicator Connect/disconnect to the power 1.Connect the power supply wire, then press power switch button, the red power indicator will light, in several seconds the picture will appear on the screen. 2. If the TV is in the state of standby, press the button on the remote control. Menu TV/AV Volume switch up/ down Channel position up/down NOTE 1.You can also press the 0-9 button to call off the standby status instead of pressing the DC Standby button. Press the digit button of the preset channel (limited to one digit) , you can complete the selection of channel while you turn on the TV set( To operate the preset of TV channel, please see TUNING on page 9-12). 2.When you do not use the remote control, you can directly press the the button on the television to call off the standby status. DC Standby Button 3. Press the button on the remote control to get into the standby state. 4. Press the button on the TV set to completely turn off the TV. Direct-digit Choosing Button Power supply auto-off function When the B.B(black background) is set ON, and there is no signal , game screen protection works, and ,in15 minutes later, it will change into standby status.