Haier AB122FDBHA User Manual - Page 14

Operation Guide 2. Press ìFAN î button to select fan speed. The display changes in the following sequence at each press on the button. Mode FAN LOU AUTO Fan speed varied with indoor temperature under ìAUTOî mode. HIGH ìFIXî mode will be displayed. when using indoor unit of duct type which MED does not allow change fan speed. LOW 3. Press ìTEMPî button to select desired temperature. TEMP Recommended temperature Cooling 26~28 C Heating 22~24 C The display changes in the above sequence at each press on the button. Temperature setting reduces 1 C with one press on this button and changes continuously if press is hold on. Temperature setting increases 1 C with one press on this button and changes continuously if press is hold on. 4. Power on Press ìON/OFFî button. Running indicator lights and running starts. In heat operation Heat wind will be blown after preheating for 3~5 minutes. In cool operation Running starts after 1 minute or so. 5. Power off Press ìON/OFFî button. Running indicator goes out and running stops. In heat operation, blowing will continue in 30 seconds or so after stoppage. To protect the machine, compressor will not start running until 3 minutes later after restart after stoppage.