Haier CF-302RC User Manual - Page 4

Caution, Using, Following, Troubles

Page 4 highlights

MAIN FEATURES 1. It can show various frozen food in the freezer. 2. The easily sliding transparent lid can give customers clear show of the goods so that they can choose the food they like. 3. A nice and new Aluminium-plastic frame can insulate heat and save energy. 4. Special designed anti-knock equipment can effectively protect the freezer from damaging. 5. Single layer coated sliding transparent lid which adopts the advanced international ESO technology makes a perfect unity of function and decoration. CAUTION FOR USING 1. Special socket (250V. 10A) and fuse socket (5A) must be used. The sockets of the freezers should be connected to stable ground wire. Zero line should not be used as ground wire. The freezer should not be plugged in the same socket with other appliances. Disobeying the rules may cause the fire. 2. In case the power cord of plug is damaged, please ask the maintenance worker to change it. Users must not try to change or lengthen the power cord by themselves. 3. The voltage range is 187V-242V.In case voltage provided by your regional power supply cannot meet this requirement, please use a safe and reliable automatic voltage regulator with the minimum output of 1000W. Or otherwise it may damage the compressor. 4. You must connect the power to check the freezer before using it. There should be a marked drop in temperature 30 minutes later. 5. Put in food only after the compressor has run for a period of time (6 hours in summer, 4 hours in winter). Or otherwise the compressor will work without stopping or it will waste energy power. 6. Hot food should be stored only after it has completely cooled off. 7. The freezer shouldn't be filled with too much food. A large block of meat should be cut and wrapped in small pieces. Proper spaces should be allowed between packages of food to ensure good air circulation. The amount of food filled to the freezer should be consistent with the freezing capability of the freezer you choose. 8. The thermostat should be adjusted according to different room temperature and the foodstuff. It should be turned down in summer (counter clockwise rotation), and up in winter (clockwise rotation). 9. Once the freezer is plugged in, there should be a continuous power supply. If power cut off is needed, you should wait for at least 5 minutes before plugging the freezer in again to avoid damaging the compressor. 10. Never put combustible, explosive of volatile liquid or gas in the freezer and never install the freezer close to them. Beverage such as beer and other stored in a glass container should be not put into the freezer. FUNCTION OF THE ELECTRIC CONTROL PANEL. 1.The number on the thermostat is from 1 to 6, and it only refers to the temperature inside from high to low, not referring to the concrete temperature. The temperature will be low when turn it clockwisely. When adjust the temperature users have to screw the cap off, and then adjust the temperature by a flat screwdriver. 2.The green lamp is a power indicating lamp. When the power is on, the lamp will be on. 3 s 2 1. Thermostat knob 2. Green lamp CLEANING AND MAINTENANCE 1. Disconnect power before cleaning. 2. To clean the freezer, please use a piece of soft cloth dampened in lukewarm water mixed with a little detergent (or some moderate detergent). After cleaning, wipe it dry. Never use corrosive detergent, hot water or washing powder. 3. Remove dust irregularly from the condenser and compressor with a soft brush to keep the freezer in good working condition. 4. Never put heavy or hot objects on the sliding transparent lid of the freezer in order to avoid deforming DEFROSTING When the frost on the freezer walls is over 6-8mm thick, the freezer needs to be defrosted. 1. Turn the thermostat to the lowest point before defrosting , so that you can take out the frozen food with the lowest temperature. 2. Disconnect the power, empty all foodstuffs from the freezer compartment. You may use the special defrosting scraper. Don't use sharp tools to remove the frost. After defrosting, clean the compartment with a piece of dry cloth. Then connect the power. 3. Put food in one hour later after the power is connected. Turn the thermostat to its original position STOP USING The freezer should not be left unuse for a long time. If it will be unuse for a short time, you must disconnect the main power first, then clean the interior of the freezer and leave the door open for 1-2 days to let it dry. THE FOLLOWING ARE NOT TROUBLES 1. There is the sound of refrigerant flowing in the system when the freezer is working. It is normal. 2. The exterior of the freezer is warm and the compressor may be so hot that it will bum your hand when it's working. It's normal too. 3. There is condensation on the surface when the freezer is placed in a high humidity area. Clean it with dry cloth. This is not defective. 4

  • 1
  • 2
  • 3
  • 4

MAIN
FEATURES
1.
It
can
show
various
frozen
food
in
the
freezer.
2.
The
easily
sliding
transparent
lid
can
give
customers
clear
show
of
the
goods
so
that
they
can
choose
the
food
they
like.
3.
A
nice
and
new
Aluminium
-plastic
frame
can
insulate
heat
and
save
energy.
4.
Special
designed
anti
-knock
equipment
can
effectively
protect
the
freezer
from
damaging.
5.
Single
layer
coated
sliding
transparent
lid
which
adopts
the
advanced
international
ESO
technology
makes
a
perfect
unity
of
function
and
decoration.
CAUTION
FOR
USING
1.
Special
socket
(250V.
10A)
and
fuse
socket
(5A)
must
be
used.
The
sockets
of
the
freezers
should
be
connected
to
stable
ground
wire.
Zero
line
should
not
be
used
as
ground
wire.
The
freezer
should
not
be
plugged
in
the
same
socket
with
other
appliances.
Disobeying
the
rules
may
cause
the
fire.
2.
In
case
the
power
cord
of
plug
is
damaged,
please
ask
the
maintenance
worker
to
change
it.
Users
must
not
try
to
change
or
lengthen
the
power
cord
by
themselves.
3.
The
voltage
range
is
187V-242V.In
case
voltage
provided
by
your
regional
power
supply
cannot
meet
this
requirement,
please
use
a
safe
and
reliable
automatic
voltage
regulator
with
the
minimum
output
of
1000W.
Or
otherwise
it
may
damage
the
compressor.
4.
You
must
connect
the
power
to
check
the
freezer
before
using
it.
There
should
be
a
marked
drop
in
temperature
30
minutes
later.
5.
Put
in
food
only
after
the
compressor
has
run
for
a
period
of
time
(6
hours
in
summer,
4
hours
in
winter).
Or
otherwise
the
compressor
will
work
without
stopping
or
it
will
waste
energy
power.
6.
Hot
food
should
be
stored
only
after
it
has
completely
cooled
off.
7.
The
freezer
shouldn't
be
filled
with
too
much
food.
A
large
block
of
meat
should
be
cut
and
wrapped
in
small
pieces.
Proper
spaces
should
be
allowed
between
packages
of
food
to
ensure
good
air
circulation.
The
amount
of
food
filled
to
the
freezer
should
be
consistent
with
the
freezing
capability
of
the
freezer
you
choose.
8.
The
thermostat
should
be
adjusted
according
to
different
room
temperature
and
the
foodstuff.
It
should
be
turned
down
in
summer
(counter
clockwise
rotation),
and
up
in
winter
(clockwise rotation).
9.
Once
the
freezer
is
plugged
in,
there
should
be
a
continuous
power
supply.
If
power
cut
off
is
needed,
you
should
wait
for
at
least
5
minutes
before
plugging
the
freezer
in
again
to
avoid
damaging
the
compressor.
10.
Never
put
combustible,
explosive
of
volatile
liquid
or
gas
in
the
freezer
and
never
install
the
freezer
close
to
them.
Beverage
such
as
beer
and
other
stored
in
a
glass
container
should
be
not
put
into
the
freezer.
FUNCTION
OF
THE
ELECTRIC
CONTROL
PANEL.
1.The
number
on
the
thermostat
is
from
1
to
6,
and
it
only
refers
to
the
temperature
inside
from
high
to
low,
not
referring
to
the
concrete
temperature.
The
temperature
will
be
low
when
turn
it
clockwisely.
When
adjust
the
temperature
users
have
to
screw
the
cap
off,
and
then
adjust
the
temperature
by
a
flat
screwdriver.
2.The
green
lamp
is
a
power
indicating
lamp.
When
the
power
is
on,
the
lamp
will
be
on.
s
2
1.
Thermostat
knob
2.
Green
lamp
DEFROSTING
When
the
frost
on
the
freezer
walls
is
over
6-8mm
thick,
the
freezer
needs
to
be
defrosted.
1.
Turn
the
thermostat
to
the
lowest
point
before
defrosting
,
so
that
you
can
take
out
the
frozen
food
with
the
lowest
temperature.
2.
Disconnect
the
power,
empty
all
foodstuffs
from
the
freezer
compartment.
You
may
use
the
special
defrosting
scraper.
Don't
use
sharp
tools
to
remove
the
frost.
After
defrosting,
clean
the
compartment
with
a
piece
of
dry
cloth.
Then
connect
the
power.
3.
Put
food
in
one
hour
later
after
the
power
is
connected.
Turn
the
thermostat
to
its
original
position
CLEANING
AND
MAINTENANCE
1.
Disconnect
power
before
cleaning.
2.
To
clean
the
freezer,
please
use
a
piece
of
soft
cloth
dampened
in
lukewarm
water
mixed
with
a
little
detergent
(or
some
moderate
detergent).
After
cleaning,
wipe
it
dry.
Never
use
corrosive
detergent,
hot
water
or
washing
powder.
3.
Remove
dust
irregularly
from
the
condenser
and
compressor
with
a
soft
brush
to
keep
the
freezer
in
good
working
condition.
4.
Never
put
heavy
or
hot
objects
on
the
sliding
transparent
lid
of
the
freezer
in
order
to
avoid
deforming
STOP
USING
The
freezer
should
not
be
left
unuse
for
a
long time.
If
it
will
be
unuse
for
a
short
time,
you
must
disconnect
the
main
power
first,
then
clean
the
interior
of
the
freezer
and
leave
the
door
open
for
1-2
days
to
let
it
dry.
THE
FOLLOWING
ARE
NOT
TROUBLES
1.
There
is
the
sound
of
refrigerant
fl
owing
in
the
system
when
the
freezer
is
working.
It
is
normal.
2.
The
exterior
of
the
freezer
is
warm
and
the
compressor
may
be
so
hot
that
it
will
bum
your
hand
when
it's
working.
It's
normal
too.
3.
There
is
condensation
on
the
surface
when
the
freezer
is
placed
in
a
high
humidity
area.
Clean
it
with
dry
cloth.
This
is
not
defective.
3
4