Haier DW12-CFE2S User Manual - Page 10

Adjusting salt consumption

Get Haier DW12-CFE2S PDF manuals and user guides View all Haier DW12-CFE2S manuals
Add to My Manuals
Save this manual to your list of manuals

Page 10 highlights

en Adjusting salt consumption The dishwasher is designed to allow for adjusting the amount of salt consumed based on the hardness of the water used. This is intended to optimize and customize the level of salt consumption so that it remains at a minimum. To adjust salt consumption, proceed as follows: Unscrew the cap from the salt container; There is a ring on the container with an arrow on it (see figure to the side), If necessary, rotate the ring in an anticlockwise direction from the "-" setting towards the "+" sign, based on the hardness of the water being used. It is recommended that adjustments be made in accordance with the following table: Hardness of the water Selector knob Salt Autonomy c o n s u m p t i o n (cycles/2kg) ºdH ºfH ºmmol/l position (Grams/cycle) 0J10 MJNT MJNIT L M L NMJOR NUJQQ NIUJQIQ =?J? OM SM ORJRM QRJUV QIRJUIV jba QM QM [RM [UV [UIV ?H? SM OR The default setting of the water softening system is -. - If using multi-functional tablets fill the salt dispenser and set the adjuster to -; if the hardness of the water is greater than 60ºfH, set it to +. 9

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
Adjusting salt consumption
The dishwasher is designed to allow for adjusting the amount
of salt consumed based on the hardness of the water used.
This is intended to optimize and customize the level of salt
consumption so that it remains at a minimum.
To adjust salt consumption, proceed as follows:
Unscrew the cap from the salt container;
There is a ring on the container with an arrow on it (see
figure to the side),
If necessary, rotate the ring in an anticlockwise direction
from the "-" setting
towards
the
"+" sign, based on the
hardness of the water being used.
9
en
It
is
recommended
that adjustments be made
in accordance with the following table:
º
dH
º
mmol/l
Hardness of the water
Salt
consumption
(Grams/cycle)
Autonomy
(cycles/2kg)
0
J
10
MJNT
MJNIT
NIUJQIQ
NUJQQ
NMJOR
ORJRM
QRJUV
QIRJUIV
[UV
[RM
[UIV
L
=?J?
jba
L
M
OM
QM
SM
?H?
SM
QM
OR
º
fH
Selector
knob
position
The default setting of the water softening system is -.
- If using multi-functional tablets fill the salt dispenser and set the adjuster to -; if the hardness
of the water is greater than 60ºfH, set it to +.