Haier HBCN05EBB Product Manual - Page 7

Door Reversal Instructions - reversible door

Page 7 highlights

Door Reversal Instructions (HBCN05EBB Only) English Your entertainment center is built with a reversible door. You have the choice of either opening it from the left or the right side. In order to reserve the opening direction of your door, please follow these simple instructions. Tilt the entertainment center backwards. Secure the rear from sliding. Tape the door to the cabinet to prevent from falling. 1. Remove the 3 hexagonal screws from base bracket. 2. Remove the pivot holding the bottom of the door. 3. Separate the door from the cabinet and remove the pivot axle from the upper side of the door. Remove and reinstall upper and lower axle door inserts to opposite side. 4. Install the pivot axle to the opposite side. 5. Re-attach the door to the cabinet and secure with tape. 6. Attach the base bracket to the opposite side 7. Install the bottom pivot aligning with the lower pivot insert on the door. Attach the 3 hexagonal screws to base bracket. 8. Remove tape. 9. As the unit was tilted, wait 24 hours before plugging it in. 6

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14

6
English
Door Reversal Instructions
(HBCN05EBB Only)
Your entertainment center is built with a reversible door. You have the choice of
either opening it from the left or the right side. In order to reserve the opening
direction of your door, please follow these simple instructions.
Tilt the entertainment center backwards. Secure the rear from sliding. Tape the
door to the cabinet to prevent from falling.
1.
Remove the 3 hexagonal screws from base bracket.
2.
Remove the pivot holding the bottom of the door.
3.
Separate the door from the cabinet and remove the pivot axle from the upper
side of the door. Remove and reinstall upper and lower axle door inserts to
opposite side.
4. Install the pivot axle to the opposite side.
5. Re-attach the door to the cabinet and secure with tape.
6. Attach the base bracket to the opposite side
7.
Install the bottom pivot aligning with the lower pivot insert on the door. Attach
the 3 hexagonal screws to base bracket.
8.
Remove tape.
9.
As the unit was tilted, wait 24 hours before plugging it in.