Haier HBF110GSS User Manual - Page 7

Defrosting/Cleaning - freezer

Page 7 highlights

Defrosting/Cleaning Defrosting Moving the refrigerator This chiller has automatic defrosting; the • Unplug the appliance water runs down the rear wall and • Remove the contents and empty the through a drain hole to a tray where it water tray on the compressor before evaporates. moving the bar chiller. DO NOT USE ANY SHARP Note: Do not hold the bar chiller by its INSTRUMENT TO SCRAPE THE ICE door or the piping whilst moving. FROM THE REAR WALL. Any damage arising from incorrect ice When a power failure is announced removal will not be covered by the manufacturer's warranty. Do not defrost • Set the temperature regulator to the highest figure. Cleaning • Do not store any additional items in the bar chiller. 1. Unplug the appliance. • Turn the regulator back to the normal 2. Wash the inner compartment with setting when the power is restored. lukewarm water and neutral detergent. 3. Dry thoroughly with a soft cloth. During a power failure Note: 1. Do not use cleansers such as soaps, Do not open the door more often than boiling water or acid, etc. necessary. 2. Do not use a scourer. • Produce in the chiller should keep o.k. for approx 3 hours during a power failure • For efficient operation, dirt and dust providing the door is not opened. should be removed from the back and bottom of your freezer from time to time. To clean the door seal, use mild, soapy water only. .7.

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9

Defrosting/Cleaning
Defrosting
This chiller has automatic defrosting; the
water runs down the rear wall and
through a drain hole to a tray where it
evaporates.
DO
NOT
USE
ANY
SHARP
INSTRUMENT TO SCRAPE THE ICE
FROM THE REAR WALL.
Any damage arising from incorrect ice
removal will not be covered by the
manufacturer’s warranty.
Cleaning
1. Unplug the appliance.
2. Wash the inner compartment with
lukewarm water and neutral detergent.
3. Dry thoroughly with a soft cloth.
Note:
1. Do not use cleansers such as soaps,
boiling water or acid, etc.
2. Do not use a scourer.
• For efficient operation, dirt and dust
should be removed from the back and
bottom of your freezer from time to time.
To clean the door seal, use mild, soapy
water only.
Moving the refrigerator
• Unplug the appliance
• Remove the contents and empty the
water tray on the compressor before
moving the bar chiller.
Note:
Do not hold the bar chiller by its
door or the piping whilst moving.
When a power failure is announced
Do not defrost
Set the temperature regulator to the
highest figure.
Do not store any additional items in the
bar chiller.
Turn the regulator back to the normal
setting when the power is restored.
During a power failure
Do not open the door more often than
necessary.
• Produce in the chiller should keep o.k.
for approx 3 hours during a power failure
providing the door is not opened.
.7.