Haier HBU-24HE03 User Manual - Page 19

MAINTENANCE [ Clean air filter ] 3. Dismantle air filter 5. Install air filter (1) Put filter into protruding parts at the top of the inlet grill. (2) Connect the two pothooks with inlet grill See 2 Air filter Drag the knob of the grill back lift the filter and take down. 4. Clean CAUTION! Don't wash with water over 50 ,to prevent discoloring or deforming. Don't dry over fire. Filter maybe burn. (A) Use vacuum suction or (B) wash with water to remove dust. Connet the two pothooks with inlet grill 6. Close inlet grill See 1. 7. Press the filter signal return key on the controller. [Clean inlet grill] (A) Remove dust with vacuum filter. (B) Wash with water. With too much dust, use soft brush and neutral detergent. 1. Open inlet grill Press the elliptical "PUSH" knob, the inlet grill will automatically drop. (the inlet grill is catched with two pothooks) Press the elliptical knob PUSH the inlet grill will automatically drop Swing off the water, and then place in cool place. Open two pothooks 2. Take off air-filter See "clean air filter" Pothook 17