Haier HBU-36CM03 User Manual - Page 22

MAINTENANCE [Clean inlet grill] 3. Take of inlet grill Open the inlet grill by an angle of 45 , lift up. Don't wash with water over 50 C,otherwise may cause decoloring or deforming. Use soft dry cloth to scrub. If dust not removed, can use water or neutral detergent. If ceiling built-in conditioner's swing plate too dirty, it can be dismantled (as described below) and cleaned. 4. Clean CAUTION! Don't wash with water over 50 C,to prevent decoloring or deforming. Use soft brush, water and neutrul detergent, then swing off the water. NOTE When too much dust To spray the special detergent for vent fan or utensils. 5. Install inlet grill see 3 6. Install air filter see "Clean air filter" 7. Close inlet grill see 1 [Clean outlet and shell] CAUTION! Don't use gasoline, benzene, diluent, polishing powder, or liquid insecticide. [Dismantle and install swing plate ] 1. Fix the swing plate at the bottom. 2. Dismantle the swing plate. CAUTION! Use water to clean the plate and don't heavily scrub, otherwise the fine hair may fall off. Unscrew the screw at both ends of the swing plate. 20