Haier HLC19R1 User Manual - Page 40

DVD System Setup DVD System Setup SETUP PLAY/ENTER General Setup Process 1.Press the setup button, the general set up page will be displayed press twice the preference page will be displayed 2.Press / to select, the item, then press to enter the submenu. ..General Setup Page.. Tv Display LB 4 3/Ps Angle Mark On 4 3/Lb Osd Lang ENG 16 9 Caption On Screen Saver Off 3.Press / to select then press PAUSE to confirm. 4.Press SETUP repeatedly to exit the set-up menus. NOTE: Preference page will be displayed when there is no DVD in the unit. To access this page, press SETUP button twice. ..Preference Page.. Parental Password Default 1 Kid Saf 2 G 3 Pg 4 Pg 13 5 Pgr 6 R 7 Nc17 8 Adult SETUP PLAY/ENTER General Setup Page ASPECT RATIO DESCRIPTION When using the DVD with the internal TV, select 4 3/LB. ..General Setup Page.. The following information applies only when the DVD output is connected to an Tv Display LB 4 3/Ps external TV. Angle Mark On 4 3/Lb Osd Lang ENG16 9 4:3/PS (PS = Pan and Scan) Caption On Screen Saver Off You may select if you have a normal aspect ratio (4:3) TV, although the NORMAL/LB (letter box) is a more common choice. In PS mode, widescreen material will fill the screen, but at the expense of chopping off extreme left and right edges of the original film picture. For this feature to work, the disc must be specially coded. Such discs are uncommon. 4:3/LB (LB = Letter Box) You may select this if you have a normal aspect ratio (4:3) TV. Widescreen material will be shown in pure unaltered form, allowing the entire picture area of the original film to be viewed without any side cropping. Black bars will appear above and below the picture. 16:9 You may select this if you have a widescreen (16:9) TV. Back bars may still appear above and below the picture even if using a widescreen TV. This is because some film directors prefer to use ultra widescreen aspect ratios e.g. 2.35:1. This will normally be indicated on the DVD packaging.