Haier HPAC9M User Guide - Page 8

English Operation 1. Wait 20 minutes before starting the unti to assure that the coolant has leveled off. 2. Wait 3 minutes before restarting the unit after a normal shutdown so as to complete the compressor cycle. 3. Use an 115 volt 20 amp outlet for the air conditioner. Do not use any other electrical appliances on this line or you may trip the fuse. Dedicate the electric line for the air conditioner alone. 4. Do not place the air conditioner in direct sunlight or close to any heating appliances. eg. baseboard heaters, stoves, etc. 5. Operate the unit on a flat surface only. 6. Check the filter at least once a month in order to acheive highest cooling efficiency. 7. If the unit is not being used for a long period of time, please remove the plug to drain pipe and drain out any condensed water. Product Specification Voltage and Frequency Input Power Cooling Capacity Moisture Removal (pints/hr) Coolant Timer Operating Temperature Range Unit Dimensions (WxDxH) (inches) Net Weight lbs. approximate 115V / 60Hz 750 W 9000 BTU 1.31/hr R22 8 Hours 64.4˚F - 95˚F 20 1/4 x 13 13/32 x 29 13/16 71.5 lbs. (7)