Haier HRD-231 User Manual - Page 3

TROUBLE SHOOTING PROBLEMS REFRIGERATOR DOES NOT OPERATE The fuse might have blown-off or circuit breaker could have tripped The power cord plug might have been removed or loosened from the electrical outlet The refrigerator timer maybe in defrost mode REFRIGERATOR OR FREEZER COMPARTMENT TEMPERATURE IS NOT COLD ENOUGH ■ The temperature control knob might not be set to a proper position ■ The refrigerator might be placed too close to a wall or heat source ■ The door could have been opened too frequently during warm weather ■ The door might have been left open for a long time ■ Large quantity/hot food might have been kept in the refrigerator ABNORMAL NOISE (S) The refrigerator could have been installed on a weak or uneven place or the leveling screws might need adjustments Unnecessary objects could be placed on or behind the refrigerator REFRIGERATOR HAS AN ODOUR Food with strong odour should be tightly covered or wrapped. They might have been left uncovered ■ The interior needs cleaning DEW FORMATION ON THE CABINET SURFACE . Not unusual during periods of high humidity ■ Door may have been left ajar 9 PLACE ON FIRM, LEVELED FLOOR If the floor is uneven, adjust the screw type supports at the bottom of the refrigerator till perfectly straight, as mentioned earlier. USE A THREE-PIN SOCKET OUTLET Make sure that the socket you are plugging your refrigerator in to has proper earthing. Improper earthing can cause electric shocks and could also damage the appliance. 0,0 PLACE THE REFRIGERATOR CLOSE TO AN ELECTRIC PLUG POINT Avoid using extension cords. Also keep the power cord rolled up and off the floor. CHOOSE A WELL-VENTILATED SPACE Provide sufficient wall clearance on all sides with a minimum of 10 cm. on each side. t10 cm 10 cm mYls. 10 cm 10 cm AVOID DIRECT SUNLIGHT & HEAT DO NOT INSTALL NEAR DAMP PLACES Dampness and draughts will impair the efficiency of insulation in the appliance. =