Haier HRF-241 User Manual - Page 5

INSTALLATION STEPS Select a safe place to install your refrigerator. Level the refrigerator by using the adjustable foot. Install the parts in their respective places. Check if the doors are completely shut. Check the voltage and wait for an hour before plugging the power cord into an outlet. After running the refrigerator for 2-3 hours, put food in the refrigerator. 5 TO CHANGE TEMPERATURE Many factors influence the internal temperature of the refrigerator and freezer section. The temperature and humidity of the room. The frequency of door openings and the amount of warm food placed in the refrigerator. The combination of food and containers stored in the refrigerator. For these reasons, you may have to adjust the control to suit the season and your needs as follows:Set temperature control at FRZ. MAX for higher cooling & REF. MAX for lower cooling in freezer compartment. Set temperature control at MAX for colder temperature and at MIN for warmer temperature in the refrigerator section. Allow approximately 12 hours or overnight for temperature to stabilize. Then check to see if further adjustments are necessary. FOR BEST SETTING DURING COLD AND HOT WEATHER, WE RECOMMEND THE FOLLOWING: Set the 'Freezer temperature control' at FRZ. MAX. Since the refrigerator operates less, the freezer compartment will require additional cooling during cold weather. If loaded with large quantities of food, the refrigerator compartment will require additional cooling during hot weather. Hence set the 'Refrigerator temperature control' at MAX. ! CAUTION Do not set the 'Refrigerator temperature control' beyond the MAX and MIN. The 'Test Run' is to be used only for a service check. To turn off refrigerator Disconnect the power supply cord. Remove ice tray and food. Leave doors open for air circulation and dehumidification of both sections. 10