Haier HSU-09CA03 User Manual - Page 15
Emergency, operation
View all Haier HSU-09CA03 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
Operation Emergency operation and test operation Emergency Operation: ® Carry out this operation only when the remote controller is defective or lost. • When the emergency operation switch is pressed, a " Pi " sound starts once, which means the start of this operation. • In this operation, it is not possible to change the settings of temperature and air flow speed, it is also impossible to do an operation by the timer. ® Follow the requirements below. II pi 1 Room Designated Timer Air flow Operation temperature temperature mode speed mode if More than 23°C 26 °C CONTINUOUS AUTO COOL a Less than 23°C 23 °C CONTINUOUS AUTO HEAT 0 Emergency Switch >K If an air conditioner is a model for both cooling and heating. Cooling when the room temperature at the start of operation is above 23 °C. Heating when the room temperature at the start of operation is less 23 °C. I- Test Operation: • Use this switch in the test operation when the room temperature is less 16 °C , do not use it in the normal operation. Continue to press the test operation switch for more than 5 seconds. After you hear the "Pi" sound twice, _If release your finger from the switch, the cooling operation starts with the air flow speed setting "Hi". " Pi " !Tr! 0 Emergency Switch a _J Removal of the restriction of emergency or test operation: ® Press once more the emergency operation switch, or manipulate through the remote controller, a "Pi" sound causes the restriction of emergency or test operation to be removed. • When the remote controller is manipulated for the removal, then the selected operation by the remote controller will be continued. .J 13