Haier HSU-12HT03 User Manual - Page 14

Operation Heat Operation Remote controller 1. Unit start Press ON/OFF on the remote controller, unit starts. 2.Select operation mode Press MODE button. For each press, operation mode changes as follows: Remote controller: AUTO COOL DRY FAN HEAT Then Select HEAT operation 3.Select temp.setting Press TEMP. button Every time the button is pressed, temp.setting increase 1 C,if kept depressed, it will increase rapidly Every time the button is pressed, temp.setting increase 1 C,if kept depressed, it will decrease rapidly Select a desired temperature. 4.Fan speed selection Press FAN button. For each press, fan speed changes as follows: Remote controller: LOW MED HI AUTO IN HEAT mode, warm air will blow out after a short period of the time due to cold-draft prevention function. 5.Unit stop Press ON/OFF button, the unit stops. Regarding the ambient temperature display during the heating operation. In defrosting, the indoor temperature value displayed may be reduced due to the dropping of cooling air of the evaporator of indoor unit under cooling mode. It is mormal phenomenon. 13