Haier HSU09XC7 HSU09XC7-G User Manual - Page 8

LOperation (5) Air flow direction adjustment After operation mode is selected, vertical flap will open automatically according to the mode. COOL About 10° Up and down (using Remote Control) Press SWING button, vertical flap will move within the range shown. Press SWING button. Release button at desired position. HEAT About 60° Left and right air flow adjustment (manual) Move the horizontal blades to adjust left and right direction r About 10° COOL About 45° HEAT About 60° r Warning: To prevent the accumulation of condensation, it is recommended not to keep the vertical flap at downward position at all time in the COOL or DRY mode. Warning: When humidity is high, condensation might collect at the air outlet if all horizontal louvers are adjusted to extreme left or right. (6) To stop the unit Press ON/OFF button. Unit stops. Only time is displayed on LCD. Vertical flap on the air handle closes automatically. r Notes: Unit won't restart until 3 minutes have elapsed, due to system protection. HEAT mode is not available on cool-only models. \.. .1 Hints As cold air flows downward in the COOL mode, adjusting the air flow horizontally will provide better air circulation. As warm air flows upward in the HEAT mode, adjusting air flow downward will provide better air circulation. . 9