Haier HWM1480KFL User Manual - Page 8

Control Panel Control Panel Operating Functions Turn the program knob clockwise/anti-clockwise to select your desired wash program. (Refer to "Guide to Operation Program Selection") wash cycle. This button is used to start or pause a you can press "start/pausep button 2 second to unlocked and open the door if status allow door open (water level lower than the bottom of the door level,water temperature lower than 50¥,motor stop). ECO Select this option after you have selected your desired wash program. This option allows you to wash using your desired wash program, but dependant on your wash load. There are three level. Level one being a light load. Level 3 being a full complete load. Select this option depending on your load. When you press this button, the washing machine performs extra rinses. When the button is pressed one time, the screen displays " - ", and one time of extra rinse is selected, if go on pressing the button, the screen will display " - "or" - ", with meaning of two or three times of performs extra rinses . When the button is pressed, the "Extra rinse" light goes on, when the extra rinse is performed, the light flashes, and "-/ / " is displayed at times. When the extra rinse ends, the light turns off, and "-/ / " disappers. This option will allow you to delay your start operation. The range in delay times is 30 minutes - 24 hours; each touch of this button will increase in increments of 30 minutes. After you have selected you desired delay time, press the Start/Pause button to start the countdown of the set time (the time is displayed on the LCD display until the delay program ends). This option can not be selected in the Rinse, Spin and Drain programs.