Haier HWM55-23BS User Manual - Page 7

How to change the direction of the drain hoses Figure 1 indicates the ex factory installation position of the drain hose. Soft item Extend the drain hose from the side of wash tub Put soft items on the ground. Lean the machine down gently with the front surface facing the ground. Take off the drain hose from the cabinet. Take the hose out of the fixing groove. (See to Figure 2). Soft item Back Front Figure 1 Embed the drain hose into the groove along the side of thewash tub in the order of (1)~(2), heading for the side of the wash tub. (See to Figure 3). Figure 2 Embed the drain hose into the groove with hands. Take care not to damage the drain hose in fastening the fixing clamp. Extend to the wash tub side Extend the drain hose from the rear side Embed into the groove in turn Take out the drain hose from the fixing groove. Extend it from the rear side as per the direction of the arrow. (When the drain hose is extended from the rear side, it can be hung on the point for drain hose at the two sides of the cabinet.) (See to Figure 4). Figure 3 Figure 4 Install the water inlet hose; Select the water level Insert the water inlet hose into the water-filling Water inlet hose entrance on the control panel directly. (pull it out to dismantle it) Select water level according to the quantity of the laundries. Adjust the water level adjusting lever to desired water level line. Water level indicator Maximum Medium Minimum Max Med Min Wash water-filling entrance 5