Haier HWM75TL User Manual - Page 15

ELECTRICAL REQUIREMENTS Earthing Instructions This appliance must be grounded. In the event of an electrical short circuit, grounding reduces the risk of electric shock by providing an escape wire for the electric current.This appliance is equipped with a grounding wire with a grounded plug.The plug must be inserted into an outlet that is properly installed and grounded. Improper use of the plug can result in a risk of electric shock. Consult a qualified electrician or service person if the grounding instructions are not completely understood or if doubt exists as to whether the appliance is properly grounded. Wiring Requirements: The washer must be plugged into at least 10AMP 220-240 VOLT, 5? 0 HZ GROUNDED OUTLET. If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard. Note: If a standard two-prong outlet is encountered, it is the personal responsibility and obligation of the consumer to have it replaced with a properly grounded three-prong outlet. Extension Cords: We do not recommend that you use an extension cord. CAUTION: If this appliance is supplied from a cord extension set or electrical portable outlet device, the cord extension set or electrical portable outlet device must be positioned so that it is not subject to splashing or ingress of moisture. Power Interruptions Occasionally there may be power interruptions due to thunderstorms or other causes. Remove the power cord from AC outlet when a power outage occurs.When power has been restored re-plug power cord to AC outlet. If outage is for a prolonged period, clean washer before using it again. 14