Haier HWM90-M826 HWM80-M826 HWM90-M826 User Manual - Page 7
Installation & Adjustment
View all Haier HWM90-M826 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
Installation & Adjustment Please install and adjust the machine according to the directions containedin this manual.It is very important to follow these directions for the safe operation of the machine,and to ensure your machine operates correctly. Install the bottom plate The purpose of the bottom plate is to suppress noise from the washing machine during operation. Steps: 1. Lay the washer on its back, on a nonabrasive surface. 2. Place the plate onto the bottom of the machine. 3. Use a screwdriver to tighten the screw ( in accessory bag) securing the panel to bottom of the washer. 4. Once the screw is tight and the panel is secure, return the washer to its standing position. Screw Bottom plate Front Back Carpet Balance washing machine Do not install this machine on an incline greater than 2° . Installing machine on an angle or on rough ground will result in unstable running or stoppage of the machine. Please adjust it by the following method: 1.Confirm it is level ˗ 2.Lift up the side of the leg slightly and twist the adjustable leg. Note: The distance between the washing machine and wall:at least 20 mm. Change the direction of the drain hose Applicable model ğHWM90-M826 5