Haier HWR05XCM Use and Care Guide - Page 15
Completing The Installation
View all Haier HWR05XCM manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
ENGLISH COMPLETING THE INSTALLATION ATTACH SIDE CURTAINS TO WINDOW Fig. 18 1. Pull the left-hand curtain and frame out until it fits flush to the side of the window frame. (See Fig.18) 2. Use a 1/8" drill bit to drill a starter hole through the top hole in the side curtain and into the window sash. 3. Insert one (1) 1" wood screws through the top hole of the left hand curtain and into the window sash. (See Fig.19) 4. Repeat for the right-hand curtain. 5. Use a 1/8" drill bit to drill a starter hole into the window sash using the top hole in the side curtain as a guide. 6. Insert one (1) of the 1" wood screws through the bottom hole of the left-hand curtain and into the window frame. (See Fig.20) 7. Repeat for the right-hand curtain. Fig. 19 FINAL INSTALLATION 1. Uncoil the included foam seal. (See Fig.21) 2. Insert the foam seal behind the top of the lower window sash and against the glass of the upper window. 3. Place the window lock bracket as shown in the diagram using a screwdriver. Use a 1/8" drill bit to drill a starter hole through the Fig. 20 hole in the window lock bracket and into the upper window. (See Fig.22) 4. Attach the window lock bracket to the upper window with one (1) 1" wood screw to secure the unit in place. 5. Plug unit into a grounded 3 prong outlet. 6. Press RESET on the power supply cord. A green light will come on. See "Electrical Requirements" for full detail. Fig. 21 Fig. 22 HOW TO INSTALL PAGE 13