Haier LET32T3 User Manual - Page 11

About your LED LCD TV / Getting Started About your LED LCD TV PREPARATION OF BATTERY CAUTION YOUR REMOTE Confirm there is no object between the remote control and the remote sensor of the TV set. CONTROL Sunshine or other strong light will interfere with the signal sent by the remote control. In this situation turn the TV set to avoid the direct light source. BATTERY INSTALLATION Do not put the remote control in direct heat or in a damp place as you may damage the remote. A Place the remote control face down, then open the cover of the battery compartment. Please use two AAA 1.5V batteries. Do not mix battery types. Install the batteries at the correct polarities. Do not use rechargeable batteries. If your TV is to be stored for a period of time, remove the batteries from the remote control. Getting Started B Install two AAA batteries. (The + and - symbol of the battery must match with the marks on the remote). SETTING UP C Close the cover of the battery compartment. LOCATION You will need to place your TV near your plug socket (so the power cable can comfortably reach) and within reach of your aerial socket or extension lead. CONNECTION A Insert your TV aerial lead into the Antenna input at the side of the TV. B Insert the batteries into the remote control. Make sure they are inserted the right way around, matching the polarity as indicated inside the battery compartment. SWITCHING YOUR TV ON A Connect your TV to the mains electrical supply Note: The red light at the bottom of the TV will be on whenever the TV is in standby and there is power to the TV. B Touch the POWER button on the right side of the TV Digital LED LCD Television Instruction Manual EN-10