Haier LT22A1 User Manual - Page 30

Before Calling Service

Page 30 highlights

BEFORE CALLING SERVICE Please make these simple checks before calling service.These tips may save you time and money since charges for receiver installation and adjustments of customer controls are not covered under your warranty. Symptoms "Ghost " or double image No power No picture Good picture but no sound Good sound but poor colour Poor picture Snowy picture and noise Horizontal dotted line Television not responding to remote control Items to Check and Actions to follow *T his may be caused by obstruction to the antenna due to high rise buildings or hills. Using a highly directional antenna may improve the picture. *C heck if the TV's AC power cord is plugged into the mains socket. *U nplug the TV, wait for 60 seconds.Then reinsert plug into the mains socket and turn on the TV again. *C heck antenna connections at the rear of the TV to see if it is properly connected to the TV. *P ossible broadcast station trouble. Try another channel. *Adjust the contrast and brightness settings. *C heck the Closed Captions control. Some TEXT modes could block the screen, *Increase the VOLUME. *C heck if the TV is muted; press the MUTE button on the remote control. *A djust the contrast, colour and brightness settings. *P oor picture quality may occur when an activated S-VHS camera or camcorder is connected to your TV and the other peripheral at the same time. Switch off one of the peripherals. *Check the antenna connection *T his may be caused by electrical interference (e.g. hairdryer, nearby neon lights, etc.) *Turn off the equipment. *C heck whether the batteries are working. Replace if necessary *C lean the remote control sensor lens on the TV. *Y ou can still use the buttons at the front of your TV. *S elect the TV mode to ensure your remote control is set in the TV mode. 28

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38

28
BEFORE CALLING SERVICE
Please make these simple checks before calling service. These tips may save you time and money
since charges for receiver installation and adjustments of customer controls are not covered
under your warranty.
Symptoms
Items to Check and Actions to follow
“Ghost ” or double image
*This may be caused by obstruction to the antenna
due to high rise buildings or hills. Using a highly
directional antenna may improve the picture.
No power
*Check if the TV’s AC power cord is plugged into
the mains socket.
*Unplug the TV, wait for 60 seconds. Then reinsert
plug into the mains socket and turn on the TV
again.
No picture
*Check antenna connections at the rear of the TV
to see if it is properly connected to the TV.
*Possible broadcast station trouble.
Try another channel.
*Adjust the contrast and brightness settings.
*Check the Closed Captions control. Some TEXT
modes could block the screen,
Good picture but no sound
*Increase the VOLUME.
*Check if the TV is muted; press the MUTE button
on the remote control.
Good sound but poor colour
*Adjust the contrast, colour and brightness
settings.
Poor picture
*Poor picture quality may occur when an activated
S-VHS camera or camcorder is connected to
your TV and the other peripheral at the same
time. Switch off one of the peripherals.
Snowy picture and noise
*Check the antenna connection
Horizontal dotted line
*This may be caused by electrical interference (e.g.
hairdryer, nearby neon lights, etc.)
*Turn off the equipment.
Television not responding to remote control
*Check whether the batteries are working.
Replace if necessary
*Clean the remote control sensor lens on the TV.
*You can still use the buttons at the front of your
TV.
*Select the TV mode to ensure your remote
control is set in the TV mode.