Haier MWM10100SS Product Manual - Page 16

English 20. INQUIRING FUNCTION (1) In clock state, press " AM/PM " to display "A" or "M" for 3 seconds. In cooking state, press " CLOCK/PRE-SET ", the LED will display clock for three seconds and the "A" or "M" for another 3 seconds. (2) In pre-set state, LED will display the clock and the seconds will be flashing at the same time. Press " AM/PM " and "A " or "M" will be displayed for 3 seconds. Then press " CLOCK/PRE-SET " to inquire the pre-set time. The pre-set time will be flashing for 3 seconds, then "A" or "M" will be displayed for another 3 seconds. After that, the oven will turn back to the clock state. (3) In the microwave cooking state, press " POWER " to inquire microwave power level, and the current microwave power will be displayed. After three seconds, the oven will turn back to the previous state. In the level 2 cooking state, the inquiring way can be done by the same way as above. 21. COOKING END REMINDING FUNCTION When the cooking is over, the buzzer will sound 5 "beep" to alert user the cooking is finished. 22. OTHER SPECIFICATIONS (1) In standby state , if the set clock digital tube displays current time, the " : " would flash; otherwise, it shows " 0:00 ". (2) In setting function state, LED displays corresponding setting. (3) In working or pause state, LED displays remainded cooking time. (4) During working, if it pauses or opens the oven door, " " would light on, after restarting, it will flash constandtly. (5) After setting a procedure, if there are no any operation in 5 minutes, it would exit setting status. (6) Refer to the sample for other details. 15