Haier P50A11-AK User Manual - Page 29
Adjust Menu
View all Haier P50A11-AK manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 29 highlights
Adjust Menu In VGA input mode , H-Position and V-Position can be used to adjust the picture position. When VGA HDMI input mode is set 1 Press MENU button and then use VOL+/- button to select Adjust menu . 2 Press CH+/- button to select the item to be adjusted, then press the VOL+/- button to adjust the desired value. Auto Adjust Clock Phase H-Position V-Position I/P Info. >>> 0 0 50 50 1366x768@50Hz Auto Adjust This is used to reset the default setting parameters (After the operation, Auto Adjusting will be display on the screen) Picture Sound Tuning Function Adjust Timer Clock This is used for adjusting H Position and V Position as well as relative parameters in VGA modes. Phase This is used for adjusting the phase of pixel clock in VGA mode. H Position Horizontal position of picture can be adjusted in this item. V Position Vertical position of picture can be adjusted in this item. Note: 1.As adjusting H position or V position parameter, It is natural that the picture will have faintness once in a while if the range is more, then to adjust contrarily to normal position. 2.As the frequency of display differ in PC device you may select the appropriate frequency to obtain desired effect. If the signal of receive is excess, the picture can be not displayed or wrong on the screen. 26