Haier XPB55-13S User Manual - Page 7

Using process Spinning 1. Put the laundries into the spin tub evenly and smoothly. Selection of the spin time list 3 Laundries Spin time (minutes) 2. Press the gland in the tub properly. Close the inner and outer cover of the spin tub. Bed sheet or blanket Underwear (knitwear) About 4~5 About 2~4 3. Spin Select suitable spin time according to the laundries, and do spinning. Swear (chemical fiber) About 1~2 Blending thin laundries Within 1 minute During spinning, if there's abnormal sound, it is generally owing to slanting placement of the laundries. Please stop the machine and re-order the laundries. In spinning, it will pause the work if you open the outer cover of the spin tub. Close it to resume the spinning. To do spinning and draining or rinsing with water-filling together, please first do spinning for around 1 minute, then do draining or rinsing with water-filling. Otherwise the spinning will stop owing to too much water stored in the spin tub. Introduction of the major function Using process The machine has good comprehensive performance, and nice appearance. It adopts streamline appearance and full plastic shell, which will never get rust. For the design on safety and reliability, it adopts the wash shelf and water reception groove design, and reduces the unfavorable influence on the electrical component by the vapor. Therefore it guarantees more safe and reliable washing. It adopts complete enclosed base frame and low-noise motor, and thus reduces the working noise significantly. We can guarantee that the purchase of this machine will bring you a clean world without disturbing your quiet life. Foam-removing spinning during high-efficiency rinsing Use the foam-removing spinning to Spin remove the extra detergent liquid. It Foam-removing spinning can both shorten the washing time and save the water consumption. Fill water for about 1 minutes Spin for about 1~2 minutes Remove most of the foam extra detergent liquid. Remove the detergent liquid remained The effect is best when the laundries quantity is below 80% of the rated value. Quick water-filling entrance If you do not need spraying spin, you can Quick water-filling entrance fill water into the wash tub directly through this entrance. It can reduce the humidity Water inlet hose inside the control panel significantly and prolong the operating life of the components. Push Water inlet jointer Control handle Quick water-filling entrance