Haier XPB60-0713S User Manual
Haier XPB60-0713S Manual
 |
View all Haier XPB60-0713S manuals
Add to My Manuals
Save this manual to your list of manuals |
Haier XPB60-0713S manual content summary:
- Haier XPB60-0713S | User Manual - Page 1
Trouble-shooting breakdowns, please come to the special maintenance department or after-sale service department of our company. Do not repair it by yourself. Twin-tub Washing Machine This manual is for XPB60-0713S Special number: 806384B Please read this manual carefully before using. Retain it - Haier XPB60-0713S | User Manual - Page 2
Washing sequence Maintenance Trouble-Shooting Answers to question 14 Specification P×ac°kinÏg läistË µ Ã ÷ Name User's manual Quantity One piece of the spin tub for some time (about one hour), then close them. Trouble-shooting Answers to question If the laundries fall to the outer side of the - Haier XPB60-0713S | User Manual - Page 3
Cleaning the overflow filter 2. Take off the corrugation pipe. Dismantle the upper part of the corrugation pipe inside the overflow filter ( as indicated in Figure 1). Water level adjusting lever Corrugation Pipe 3. Cleaning the overflow filter Clean the lint around the filter and flush with - Haier XPB60-0713S | User Manual - Page 4
, or the receptacle is loose, be sure to have it replaced by the technicians of our special shop or our agent, or the after-sale service department for the sake of avoiding any risk. Do not put the machine at damp place like the bathroom . Never wash it with water. Do - Haier XPB60-0713S | User Manual - Page 5
Rinsing Rinse with stored water (Repeat the midway spinning and rinsing with stored water for 2-3 times) 1. Put the laundries into the wash tub. Select suitable current according to the laundries. 2. Fill water to preset water level. 3. Rinse Adjust the wash timer to 2-3 minutes to do rinsing. When - Haier XPB60-0713S | User Manual - Page 6
Installation and adjustment Please install and adjust the machine according to the requirement of the manual. It is very important to your security and correct operating the machine. Install the lint filter After opening the package,please take out the lint - Haier XPB60-0713S | User Manual - Page 7
) STRONG STANDARD DRAIN WASH SELECTOR Spin timer (to set to below 1 minute, first set to 2 minute then turn it back. it can increase the service life of the timer). OFF 5 1 4 2 3 SPIN TIMER Wash 1. Fill the water and add the dissolved washing powder to make the water level reach the - Haier XPB60-0713S | User Manual - Page 8
prone to lose color. The whitener shall not touch the laundries directly. Refer to the user's manual for the usage and quantity of the whitener. For powder whitener, please dissolve it before using. powder is different. Please refer to the instruction of the washing powder for the detail dosage. 7
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
 |
 |
(If
there's
breakdown,
please pull
off the power
plug
before checking) The following
phenomena are not
breakdowns
sometimes.
Please
confirm
again
before sending
it to repair.
If there are real
breakdowns,
please come to
the
special
maintenance
department or after-sale service department of our company. Do not repair it by yourself.
Trouble-shooting
Answers to question
14
×°ÏäËμ
Ã÷
Specification
Water level
Water quantity
estimated
(L)
Maximum/48
Medium/39 Minimum/33
Injection pressure(MPa)
0.02~0.2
Rated
spinning capacity(kg)
4.5
Rated
washing capacity(kg)
6.0
Rated voltage
frenquency
230V
60Hz
Phenomena
Use it when the power is on.
Insert the power plug tightly.
Remove the foreign materials?
Put down the drain hose?
Remove the foreign material?
Please contact the after-sales
service department.
Level the machine properly.
Pressed the gland
evenly
Remove the laundries
Remove a little
laundries
The reason
How to settle
The machine does
not function.
Is there power failure?
Is the power plug loose?
Is the pulsator twisted by
foreign materials?
Has
the drain hose being
laid down?
Is the drain hose blocked
by foreign material?
Are there any
laundries
trapped at the outer side
of the spin tub?
There's abnormal
sound during
washing
Remove the hair pin, coins or
metal items
Are there hair pin, coins
or metal
items brought
inside the tub?
Is the machine slanting?
Is the gland pressed evenly?
Are there any
laundries trapped
at the outer side of the spin tub?
Are the laundries in spin tub over
loaded?
There's abnormal
sound and violent
vibration during
spinning
The draining does
not function
Twin-tub Washing Machine
User's
manual
XPB60-0713S
Twin-tub Washing Machine
User's
manual
This manual is for
Please read this manual
carefully before using.
Retain it for future reference.
Special number:
806384B