Haier XPB60-0713S User Manual - Page 3
Names of the parts
View all Haier XPB60-0713S manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 3 highlights
Cleaning the overflow filter 2. Take off the corrugation pipe. Dismantle the upper part of the corrugation pipe inside the overflow filter ( as indicated in Figure 1). Water level adjusting lever Corrugation Pipe 3. Cleaning the overflow filter Clean the lint around the filter and flush with tap water. Figure 1 4. Install the overflow filter. (1).Install the corrugation pipe. (2).Insert the mounting plate at the bottom of the filter into Hook the valve cover. (3).Hang up the hook at the left upper side. (4).Push the upper part in as indicated in Figure 2. Figure 2 Cleaning the protective cover During washing clothes,must use protective cover Finished washing everytime ,please clean lint on the surface Please clean lint under the protective cover termly Cleaning method: Push 1.Push as the figure ,take down the protective cover as the arrowhead way Down 12 N¸am÷es²of ¿theÎpar»ts à û ³ Æ Valve cover Meaning and description of the symbols Warning sign Contents marked with that symbol are related to the safety of the product and the personal safety of the users. Please operate in strict conformity to the contents, otherwise it may cause damage of the machine or injure the personal safety of the user. Forbidding sign Contents marked with that symbol are actions forbidden to perform. Performing of those actions may result in damage of the machine or injure the personal safety of the user. Please check if the power receptacle has good earthing condition before using to guarantee your safety. 1