Haier XQB55-10H User Manual - Page 10
Using process
View all Haier XQB55-10H manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
Preparation before washing Using process Preparation before washing 1.Connect the water inlet hose and open the water tap . 2.Confirm that the washing machine is earthed reliably . Then insert the power plug into the receptacle. Do not connect the earth terminal to the gas pipe and tap water pipe. 3.Put down the drain hose. Pay attention to followings before washing the laundries Confirm if there's special requirment for the laundries. Clear the pocket. Take out the coins , sand, hairpins etc. Fasten the buttons and zippers. The quantity of the laundries shall not exceed the rated value. The big laundries like the jeans shall be put in loosely. When the pulsator is running , the buttons of the laundries may cause noise. For the sake of discretion,please put the laundries with buttons into other laundries. a.Please check if the laundries are applicable for washing. b.Separate those not colorfast from other laundries. c.For laundries not waterabsorbing,please put them into water with hands. d.For laundries with much soil,please remove the soil first.You can add detergent on the part with serious soil directly.It is much easier to remove the soil by that mean. e.For laundries likely to get lint ball or with long fiber,please first turn the inside out before putting them into the water. f. Do not put the laundries polluted with chemicals directly into the washing machine. g.For those small laundries ,laundries likely to be twisted or worn,and woolen laundries, please put them into mesh bag before wasing. h. Do not select heating function for clothes that should avoid hot water or wear. i . In order to prevent the heating band from being entangled, washing of seriously worn or linty clothes should be prohibited. 8