Haier XQG6511SU User Manual - Page 6
Installation - xqg65 11su
UPC - 688057196596
View all Haier XQG6511SU manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 6 highlights
Installation Remove all the packing materials as shown in figure 1 (including the foam base) Check attachments and materials Name Qty Model Operational Quality manual certificate Water hose XQG65-11SU 1 1 1 Drain holder 1 Fig.1 Plastic plugs 3 Remove the packing screws as shown in figure 2. The packing bolts protect the appliance from impact damage during transportation. Follow the steps below before using the appliance. 1. Remove the rear panel of the washing machine; 2. remove the three packing bolts from the rear panel of the washing machine, the rubber hose and then the shock absorption steel channel; 3. refit the back plate; 4. fill the holes left by the packing bolts with plastic plugs. (Attention: the packing bolts and rubber hose should be kept in a safe place for later use) Adjusting the position of the washing machine. The washing machine is provided with adjustable feet. Before use, adjust the feet until the appliance is level, as shown in figure 3. Fig.2 Fig.3 4