Hamilton Beach 04270 Use & Care - Page 4

840121000 ENv01.qxd 2/13/04 3:05 PM Page 6 To rotate the swivel plug: • Loosen screw with Philips screwdriver until screw pops out allowing the plug assembly to rotate. • Rotate plug 90º to desired tab position and retighten screw. NOTE: Outlets in older homes may not hold the odor eliminator securely. If the odor eliminator seems "loose" within the outlet, please contact a qualified electrician to replace the obsolete outlet. 5. Turn ON; the green light will indicate that the unit is on. NOTE: You may leave the odor eliminator on constantly or only use occasionally for strong odors. The odor eliminator is designed to work best when plugged in within six feet of the odor source. 6 Cleaning 1. Turn off and unplug the odor eliminator before cleaning. 2. Wipe the exterior housing with a clean, dry cloth only. 3. To clean the grill, wipe with a damp cloth or use a vacuum cleaner to remove lint or debris. 4. Do not use detergents, solvents, or spray cleaners. Do not immerse unit in water or other liquid. To Replace the Filter NOTE: A filter should last 1 to 4 months, depending on use. 1. Turn off and unplug the odor eliminator. Open cover of odor eliminator and remove the used filter. 2. Discard used filter. Remove plastic bag from new filter before installing. Use only Hamilton Beach TrueAir™ filters. 3. Press the reset button. The Filter Status/Power Indicator Light will continue to blink red until it has been reset. Customer Service If you have a question about your odor eliminator, call our toll-free customer service number. Before calling, please note the model, type, and series numbers and fill in that information below. These numbers can be found on the back of your odor eliminator. This information will help us answer your question much more quickly. MODEL TYPE SERIES 7