Hamilton Beach 250 Operation Manual - Page 3
Technical Service - 250s
UPC - 040094012527
View all Hamilton Beach 250 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 3 highlights
Safety Alert Symbols The following safety alert symbols are used throughout this manual to alert you to the safety hazards described below. Electrical Shock Hazard Disconnect power before cleaning blender base. Failure to follow these instructions can result in death or electrical shock. Electrical Shock Hazard Plug into a grounded outlet. Do not remove ground. Do not use an adapter. Do not use an extension cord. Failure to follow these instructions can result in death, fire, or electrical shock. Cut Hazard Always place lid on container when blending. Do not put hands, spoons, or other utensils in container when blending. Failure to follow these instructions can result in broken bones, cuts, or other injuries. Burn Hazard Always use caution when blending hot contents. Failure to follow these instructions can result in burns. Sanitizing Sanitize using 1 tablespoon (15 ml) of household bleach per 1 gallon (3.8 liter) of clean, cool water (60°F/16°C), mixed according to the instructions on the bleach. 1. Fill container with sanitizing solution, replace lid and filler cap and run on LOW speed for 2 minutes. Empty container. 2. Wipe exterior with soft cloth dampened with sanitizing solution. 3. Immerse lid and filler cap in sanitizing solution for 2 minutes. 4. Place empty container on base and run on HIGH speed for 2 seconds to remove any moisture from the cutter assembly. 5. When ready to use, rinse with clean water. Technical Service For assistance or replacement parts, call our Technical Service number: 866-285-1087 or 910-693-4277 8 a.m. - 5:00 p.m. EST Monday - Friday www.commercial.hamiltonbeach.com Replacement Parts The following components are subject to wear and should be replaced at least yearly. We recommend keeping a replacement container and cutter on hand. Part Description 44 oz. polycarbonate container 32 oz. Stainless Steel container Cutter assembly (Rubber Clutch) Part Number 6126-250 6126-250S 98250 3