Hamilton Beach 54619 Use & Care - Page 6

840155503 ENv01.qxd:840153700 ENv01.qxd 7/9/10 8:37 AM Page 6 How to Clean Quick Cleaning Quick cleaning should only be used to rinse the blender between batches of processing the same food. When the processing of a single type of food is finished, the blender should be disassembled and thoroughly cleaned as instructed below. To quick clean, pour 2 cups (500 ml) warm water in jar and add 1 drop liquid dishwashing detergent. Run the blender on DISPENSE for 10 seconds. Flush soapy water through dispenser until cleaned. Discard soapy water. Rinse blender jar with clean water. Flush clean water through dispenser until cleaned. This function is not a substitute for regular cleaning as instructed below This function should never be used when blending any mixture containing eggs, milk, or any other dairy products. Regular Cleaning w WARNING Electrical Shock Hazard. Disconnect power before cleaning. Do not immerse cord, plug or base in any liquid. 1. Unplug blender from electrical outlet. 2. Wipe blender base and cord with a damp cloth or sponge. To remove stubborn spots, use a mild, nonabrasive cleanser. 3. To clean jar, unscrew cutting assembly from jar. 4. Carefully remove gasket from cutting assembly. 5. Remove dispenser assembly from jar by turning counterclockwise four revolutions. NOTE: All parts except the cutting assembly and gasket may be washed in the dishwasher (on the top rack only). Some part distortion may occur if your household dishwasher temperature is higher than normal or if the parts are placed too close to the heating element. 7. Reassemble cutting assembly and gasket onto jar, and replace jar onto blender base. Ensure dispenser assembly or spout cap are fully rotated clockwise to lock into position (reverse of Step 5 above). 8. Store blender with lid or filler cap removed to prevent container odor. NOTE: DO NOT remove seal rings from dispenser adapter. 6. Carefully wash cutting assembly, gasket, jar, and lid in hot, soapy water. Rinse and dry thoroughly. Do not soak. Do not wash cutting assembly or gasket in a dishwasher. 6