Hannspree HB-175APB User Manual - Page 8
Installation Instructions, Power
View all Hannspree HB-175APB manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
User's Manual INSTALLATION INSTRUCTIONS INSTALL REMOVE Figure.1. Installing and Removing the Base INSTALLATION: 1. Align the monitor with the opening in the base. 2. Note that the longer section of the base points forward. 3. Snap the monitor into its base. A clear click sound will affirm that the base is connected correctly. 4. Verify that the monitor is securely attached to the base by looking at the bottom of the base and making sure that the clips are fully engaged in the base. REMOVAL: 1. Flip over the monitor so that it is upside down. 2. Press the button on the arm that holds the monitor in place. 3. Gently pull the base from the monitor until they are unattached. POWER POWER SOURCE: 1. Make sure that the power cord is the correct type required in your area. 2. This LCD monitor has an Internal universal power supply that allows operation with either 100/120V AC or 220/240V AC voltage areas (No user adjustment is required.) 3. Connect one end of the AC-power cord to your LCD monitor's AC-input socket, and the other end to the wall-outlet. 8