Hannspree HF229HPB User Manual - Page 20

ERROR MESSAGE & POSSIBLE SOLUTIONS CABLE NOT CONNECTED: 1. Check that the signal-cable is properly connected, if the connector is loose, tighten the connector's screws. 2. Check the signal-cable's connection pins for damage. INPUT NOT SUPPORT: Your computer has been set to unsuitable display mode, set the computer to display mode given in the following table. FACTORY PRESET TIMING TABLE: MODE 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 20 RESOLUTION 640x350@70Hz 640x400@70Hz 720x400@70Hz 640x480@60Hz 640x480@67Hz 640x480@72Hz 640x480@75Hz 800x600@56Hz 800x600@60Hz 800x600@72Hz 800x600@75Hz [email protected] 1024x768@60Hz 1024x768@70Hz 1024x768@75Hz 1152x864@75Hz 1152x870@75Hz 1280x720@60Hz 1280x768@60Hz 1280x768@75Hz 1280x960@60Hz 1280x960@75Hz 1280x1024@60Hz 1280x1024@75Hz HORIZONTAL FREQUENCY (KHz) 31.469 31.469 31.469 31.469 35 37.861 37.5 35.156 37.879 48.077 46.875 49.725 48.363 56.476 60.023 67.5 68.681 45 47.396 60.289 60 74.592 63.981 79.976 VERTICAL FREQUENCY (Hz) 70.087 70.087 70.087 59.94 66.667 72.809 75 56.25 60.317 72.188 75 74.5 60.004 70.069 75.029 75 75.062 60 59.995 74.893 60 74.443 60.02 75.025