Hannspree ST329MUB User Manual - Page 32

English 3.4 Adjusting Channel Settings 1 Press MENU to enter the OSD Main Menu Picture screen. Audio Antenna Scan Mode Auto Scan 2 Press / on the remote control or CHS / CHT on the control panel to select Channel menu. 3 Press / OK on the remote control or Channel V-CHIP Setup Channel List INPUT on the control panel to enter the Channel menu. Move OK Enter Return Return Menu Exit 4 Press / on the remote control or CHS / CHT on the control panel to select an item. 5 Press / OK on the remote control or INPUT on the control panel to enter the item. 6 Press / on the remote control or VOL+/ VOL- on the control panel to change the scales or press OK on the remote control or INPUT on the control panel to mark an item. 7 Press RETURN to return to the Channel menu. 8 Press MENU to exit the Channel menu. 9 The Channel menu can be used to perform a channel search and edit channel list (see "Performing an Automatic Channel Search" on page 27 and "Editing Channel Table or Favorite Channel" on page 28). •The Antenna can be set to Air or Cable. •The Scan Mode can be set to Auto, Analog, or Digital. •The Auto Scan can be set to Auto, Standard, HRC, or IRC (under Cable mode only). Note: The Channel settings are available when the signal is set to TV source. 32