Hannspree ST551MBB User Manual - Page 40

English 7 Dissembling the stand base 1 Disconnect all the cables and cords from the TV to prevent breakage. 2 Carefully place the TV face down on a soft and flat surface (blanket, foam, cloth, etc) to prevent any damage to the TV. 3 Remove the six (6) screws so that the stand base can be removed. 4 Gently remove the stand base. ( For reference only ) Wall mounting the TV: 1 Purchase a VESA compatible wall bracket: VESA 400 X 400, 4 holes, M6, 20mm. 2 Locate your ideal TV position on the wall. 3 Fix the wall bracket firmly on the wall. 4 Secure the TV to the bracket using the 4 mount holes on the back and center of the TV. Note: • Please read the instructions of your specific wall bracket to properly wall mount the TV. • The pitch of the mounting holes is 400mm horizontally and 400mm vertically. • The screws type required is metric: M6, 20 mm length. • The 55" TV stand base can be screwed on a table or a hard surface using the hole on the back of the stand base. Nevertheless, it's recommended to mount your TV on the concrete wall. *Installing the LCD TV requires special skill that should only be performed by qualified service personnel. Customers should not attempt to do the work themselves. please contact with Hannspree dealers in wall mount bracket. You can ask a qualified service personnel about using an optional bracket to mount the TV to the wall. Please add rubber cover when this TV is mounted on the wall. Equipment to be used with for open site. 39