Harman Kardon AVR 225 Owners Manual - Page 8

FRONT-PANEL INFORMATION DISPLAY N Sleep Indicator: This indicator lights when the Sleep function is in use. The numbers in the Preset Number/Sleep Timer J will show the minutes remaining before the AVR 225 goes into the Standby mode. (See page 24 for more information on the Sleep function.) O Memory Indicator: This indicator flashes when entering presets and other information into the tuner's memory. P Stereo Indicator: This indicator lights when an FM station is being tuned in stereo. This indicator differs from the indicator that lights when the surround decoding modes are turned off, which is described above as the Dolby 3 Stereo/Stereo Indicator E. Q Tuned Indicator: This indicator lights when a station is being received with sufficient signal strength to provide acceptable listening quality. R Auto Indicator: This indicator lights when the tuner's Auto mode is in use. S Main Information Display: This display shows messages relating to the status, input source, surround mode, tuner, volume level or other aspects of the AVR 225's operation. T Analog Input Indicator: This indicator lights when an analog input source has been selected. U Coaxial Digital Input Indicators: These indicators light to show when a coaxial digital audio input has been selected. V Optical Digital Input Indicators: These indicators light to show when an optical digital audio input has been selected. NOTE: See page 26 for information on assigning either an analog input or one of the digital audio inputs to the source currently in use. 8 FRONT-PANEL INFORMATION DISPLAY