Harman Kardon AVR 225 Product Information - Page 18

PA 4000, PA 2000 - avr 225

Page 18 highlights

PA 2000 Multiroom/Multichannel Power Amplifier Designed to power loudspeakers in other parts of your house - or to add extra home cinema channels for 7.1 surround, the PA 2000 delivers 4 x 45 watts or 2 x 100 watts. Special circuitry maintains signal integrity over long cabling distances, so you can enjoy high fidelity anywhere in your home. Fanless cooling for ultraquiet operation and automatic, music-sensing power on/off are featured, too. PA 4000 Multiroom/Multichannel Power Amplifier This remarkably flexible power amplifier combines four bridgeable 45-watt amplifier pairs (a total of eight channels) with two separate inputs to allow simultaneous home theater and multizone use. For example, bridge two amplifier pairs and use them for the rear surround channels of a 7.1 surround system, while a second input from a multizone system feeds two separate rooms with 2 x 45 watts of high-current, wide-bandwidth power. Music Sense turn-on or a low-voltage trigger may be used for automatic operation with any system, and independent volume controls allow you to set a different level at each speaker location. For the ultimate in control, pair the PA 4000 with Harman Kardon's KP 1 keypad for complete power on/off and volume control from a remote room, and add an optional IR sensor so that the PA 4000 can truly serve as the audio amplification and multizone hub of your home's complete audio/video system. Extending the passion...multiroom enhancements. Thanks to Harman Kardon, high-quality audio is no longer limited to a single room in the house, and you don't need a complex room full of gear to enjoy music throughout a home. Harman Kardon AVR and DPR receivers (except AVR 125 and AVR 225) include a complete multizone system that feeds a separate input source to a second zone, a standard Zone II remote, and complete 18

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40

PA 4000
Multiroom/Multichannel Power Amplifier
This remarkably flexible power amplifier combines four bridgeable 45-watt amplifier pairs (a total of eight channels) with two sepa-
rate inputs to allow simultaneous home theater and multizone use. For example, bridge two amplifier pairs and use them for the rear
surround channels of a 7.1 surround system, while a second input from a multizone system feeds two separate rooms with 2 x 45
watts of high-current, wide-bandwidth power. Music Sense turn-on or a low-voltage trigger may be used for automatic operation
with any system, and independent volume controls allow you to set a different level at each speaker location. For the ultimate in
control, pair the PA 4000 with Harman Kardon’s KP 1 keypad for complete power on/off and volume control from a remote room,
and add an optional IR sensor so that the PA 4000 can truly serve as the audio amplification and multizone hub of your home’s
complete audio/video system.
PA 2000
Multiroom/Multichannel Power Amplifier
Designed to power loudspeakers in other parts of
your house – or to add extra home cinema channels
for 7.1 surround, the PA 2000 delivers 4 x 45 watts
or 2 x 100 watts. Special circuitry maintains signal
integrity over long cabling distances, so you can enjoy
high fidelity anywhere in your home. Fanless cooling
for ultraquiet operation and automatic, music-sensing
power on/off are featured, too.
Extending the passion...multiroom enhancements.
Thanks to
Harman Kardon, high-quality audio is no longer limited to a single room in the house, and you don’t need a complex room full
of gear to enjoy music throughout a home. Harman Kardon AVR and DPR receivers (except AVR 125 and AVR 225) include a
complete multizone system that feeds a separate input source to a second zone, a standard Zone II remote, and complete
18