Harman Kardon AVR 630 Product Information - Page 10

PA 2000 Multiroom/Multichannel Power Amplifier Add remote rooms or additional channels to an existing surround system with this high-current, bridgeable amplifier. Fan-free for ultraquiet operation, the PA 2000's design is optimized for the requirements of the long signal paths found in multiroom systems. PA 4000 Multiroom/Multichannel Power Amplifier Thanks to four bridgeable high-current amplifier pairs (a total of eight 45-watt channels) and two separate inputs, the PA 4000 is suited to a wide range of applications. Power two separate zones, or the back channels of a home theater and a remote zone simultaneously with ease, while a variety of power control options such as Music Sense and a low-voltage trigger make operation a breeze. For the ultimate in control, the KP 1 keypads may be used for remote power on/off and volume control, with the added capability of using an optional IR sensor for total system control. Multiroom enhancements. It no longer takes a room full of gear to enjoy music throughout the house. Our AVR and DPR models (except AVR 130 and AVR 230) include a multizone system that feeds a separate source to a second zone controlled by the standard Zone II remote and assignable rear-channel amplifiers. For more rooms and power, the 18 KP 1 In-Wall Keypad The KP 1 powers up the PA 4000 and controls the volume in any room. Using Decora®-style faceplates (not included) to blend with any room décor, it may also control compatible Harman Kardon products when used with an optional IR sensor. AB 1 Amplified In-Wall Module for A-BUS® Applications The innovative A-BUS system makes it incredibly easy to bring Harman Kardon sound to a remote room. Connected via a single cable, the AB 1 powers most in-wall speakers from its internal amplifier with volume controlled by the up/down toggle or a Harman Kardon remote. A built-in IR sensor completes the package, making it easier than ever to enjoy music throughout the house. PA 4000 and PA 2000 drive the system, while A-BUS Ready operation uses a single cable to send power, control and audio to an in-wall module that not only controls but also powers the system. To view every model, visit www.harmankardon.com 19